- RS-stocknr.:
- 513-862
- Fabrikantnummer:
- HK1010E
- Fabrikant:
- SKF
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11-04-2024, met een levertijd van 1 werkdag.
Prijs Per stuk
€ 4,73
(excl. BTW)
€ 5,72
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 4,73 |
5 - 9 | € 4,52 |
10 - 24 | € 4,44 |
25 + | € 4,35 |
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 513-862
- Fabrikantnummer:
- HK1010E
- Fabrikant:
- SKF
Wetgeving en compliance
N.v.t.
Productomschrijving
SKF Drawn Cup Needle Roller Bearing, 10mm ID, 14mm OD - HK 1010
Use this compact needle roller bearing from SKF to reduce the friction of radial loads in your machines. It consists of a number of long cylindrical rollers in a metal casing. The non-separable design means this device can accommodate a large number of rollers for excellent load-bearing capacity. This also means it can run at high speed without experiencing wear and tear. This unit has an extremely high reference speed of 18,000r/min (rotations per minute) and a limiting speed of 20,000r/min, so you can rely on it to support high-speed operation without breakdown.
Sheet steel cage material has high tensile strength for a long service life
Open end for quick and direct lubrication
Simple design removes snap rings for straightforward mounting
570N fatigue load limit for increased durability against metal corrosion in demanding environments
Open end for quick and direct lubrication
Simple design removes snap rings for straightforward mounting
570N fatigue load limit for increased durability against metal corrosion in demanding environments
Applications
Automotive engineering
Mining equipment
Printing presses
Energy industry
Mining equipment
Printing presses
Energy industry
Where can I use this bearing?
This roller bearing is ideal for applications where space is limited. The compact dimensions fit into tight spaces with ease and can bear very high loads. This makes it suitable for high-speed rotating shafts, pivots and levers.
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 10mm |
Outside Diameter | 14mm |
Roller Bearing Type | Needle |
Race Width | 10mm |
Bore Type | Parallel |
Material | Metal |
Static Load Rating | 5.3kN |
Cage Material | Sheet Steel |
Number of Rows | 1 |
Dynamic Load Rating | 4.29kN |
End Type | Open |
Reference Speed | 18000rpm |
Limiting Speed | 20000rpm |
Fatigue Limit Load | 570N |
Maximum Speed - Grease | 16000rpm |
Maximum Speed - Oil | 24000rpm |