INA HK3026 30mm I.D Drawn Cup Needle Roller Bearing, 37mm O.D
- RS-stocknr.:
- 137-1770
- Fabrikantnummer:
- HK3026
- Fabrikant:
- INA
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
27 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 10,02
(excl. BTW)
€ 12,12
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 10,02 |
| 5 - 9 | € 9,62 |
| 10 - 24 | € 9,43 |
| 25 + | € 9,21 |
- RS-stocknr.:
- 137-1770
- Fabrikantnummer:
- HK3026
- Fabrikant:
- INA
Datasheets
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole
INA
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 30mm |
| Outside Diameter | 37mm |
| Roller Bearing Type | Drawn Cup Needle |
| Race Width | 26mm |
| Bore Type | Parallel |
| Material | Steel |
| Static Load Rating | 54000N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 28000N |
| End Type | Open |
| Limiting Speed | 8600rpm |
| Reference Speed | 6200rpm |
| Maximum Speed - Grease | 5200rpm |
| Fatigue Limit Load | 7400N |
| Maximum Speed - Oil | 8600rpm |