Onlangs gezocht

    INA HF2016-L564 20mm I.D Drawn Cup Clutch Roller Bearing, 26mm O.D

    RS-stocknr.:
    137-1792
    Fabrikantnummer:
    HF2016-L564
    Fabrikant:
    INA
    INA
    Bekijk alle Roller Bearings
    31 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    55 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    € 21,72

    (excl. BTW)

    € 26,28

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 4€ 21,72
    5 - 9€ 20,86
    10 - 24€ 20,42
    25 +€ 19,99
    RS-stocknr.:
    137-1792
    Fabrikantnummer:
    HF2016-L564
    Fabrikant:
    INA
    Land van herkomst:
    DE

    Datasheets


    Wetgeving en compliance

    Land van herkomst:
    DE

    Productomschrijving

    Drawn Cup Roller Clutches


    INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.

    Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.

    Features and Benefits


    • Lower operating costs

    • Reduced maintenance due to improved lubrication

    • Lower heat generation

    • Less noise

    • Roller clutches, HF series, do not have a bearing arrangement and can only transmit torques

    • Roller clutches, HFL series, have an integral plain or rolling bearing arrangement and can support torques and radial forces.

    Product Application Information


    Drawn cup roller clutches can be used in various applications such as indexing clutches, back-stopping clutches and overrunning clutches. In these cases, the drawn cup roller clutch performs an overrunning or locking function.

    Suffixes


    KF - Plastic pressure springs


    INA

    Specificaties

    KenmerkWaarde
    Inside Diameter20mm
    Outside Diameter26mm
    Roller Bearing TypeDrawn Cup Clutch
    Race Width16mm
    Bore TypeParallel
    MaterialSteel
    Cage MaterialPlastic
    Number of Rows1
    End TypeOpen
    Limiting Speed6500 (Rotating Outer Ring) rpm, 7000 (Rotating Shaft) rpm
    Maximum Speed - Oil6500 (Rotating Outer Ring) rpm, 7000 (Rotating Shaft) rpm
    Maximum Speed - Grease6500 (Rotating Outer Ring) rpm, 7000 (Rotating Shaft) rpm
    31 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    55 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    € 21,72

    (excl. BTW)

    € 26,28

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 4€ 21,72
    5 - 9€ 20,86
    10 - 24€ 20,42
    25 +€ 19,99