Needle roller bearing ID 17mm OD 30mm Wi

  • RS-stocknr. 194-7301
  • Fabrikantnummer NA6903-XL
  • Fabrikant INA
Wetgeving en compliance

The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements

Kenmerk Waarde
Inside Diameter 17mm
Outside Diameter 30mm
Roller Bearing Type Needle
Race Width 23mm
Bore Type Parallel
Material Steel
Static Load Rating 29000N
Number of Rows 1
Dynamic Load Rating 21100N
End Type Open
Fatigue Limit Load 5200N
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 31,70
5 - 9
€ 30,43
10 - 24
€ 29,80
25 +
€ 29,17