Baumer IVO Absolute Encoder 4096 ppr 6000rpm Hollow 10 → 30 V dc

  • RS-stocknr. 481-7622
  • Fabrikantnummer GXM1W.A20W0BBB00
  • Fabrikant Baumer
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

GXM1W.A20W0BBB is a combination of two Baumer products: 1. GXP1W.A2041C1 - Parallel absolute encoder
2. Z 140.001 - Female 37-pin D-SUB connector

Solid Shaft / Hollow Shaft Absolute Encoders

Application
An absolute encoder provides the ability to remember the exact position following any power interruption. There is also no need for synchronisation. This is one of the reasons why absolute encoders are used where a safety standard is required (i.e. robotics industry). Typical applications are for speed or position control circuits. The features for these encoders are:

+ A unique signal for each angular position
No need for initialisation (zero reference)
Immediately after power up or after an interruption of power the position is maintained
No need for a counter to process the signal

Construction
The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and a diaphragm. The light/dark pattern is converted to an electrical signal by an array of photo diodes. The same code occurs only once per revolution. This encoder is defined as a single turn encoder.

Output circuit

Types of Code
Any electronic code is made out of a combination of bits. Each bit is characterised by a Low (0) or a High (1) signal. The combination of a series of bits is called a binary word. Several binary words make a code.

Single Step Code - Only one bit on the parallel output changes state at any given time. There is no possibility of any concurrent state changes. Single step code is very versatile and can maintain accuracy even allowing for slight misalignments of the disc and scanning device
Gray Code - This is a single step code, most absolute encoders use this code
Multiple Step Codes - Natural binary code: This type of code is similar to the decimal system, except that there are only 1 and 0. Each bit, depending on its position in the binary word, has a definite value. 20 to 2n assigned

Specificaties
Kenmerk Waarde
Encoder Technology Optical
Maximum Revolutions 6000rpm
Output Signal Type Digital
Shaft Type Solid shaft
Supply Voltage 10 → 30 V dc
Shaft Diameter 10mm
Resolution MT 12 bit, ST 12 bit
IP Rating IP65
Interface Parallel
Overall Width 58 Dia.mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Series GXM1W
Connection Type Cable output 1 m
Mounting Type Clamping Flange
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.789,60
(excl. BTW)
2.165,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.789,60
Related Products
Carbon-fibre reinforced polyamide housing.Extended voltage supply range from ...
Description:
Carbon-fibre reinforced polyamide housing.Extended voltage supply range from 4.75 → 30 VdcUniversal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.Resolution up to 5000 pulses / turn.Output signals A; A/; B; B/; Zero pulse; ...
Incremental rotary encoders. Miniature incremental encoders for detecting ...
Description:
Incremental rotary encoders. Miniature incremental encoders for detecting angles, direction of rotation and speed measurements.Resolution up to 1024 pulses.Casing diameter: 24 mm.Radial output on 1 m cable.Spring and shoulder screw mounting.
Sick AFM60 multiturn PROFINET absolute encoders offer high-precision ...
Description:
Sick AFM60 multiturn PROFINET absolute encoders offer high-precision measurement of absolute position and speed. Comprehensive functions for diagnosing parameters such as temperature or operating time and early error detection increase network reliability. Various configuration options are available, such as ...
Allen Bradley 842E series ultra-high resolution EtherNet/IP absolute ...
Description:
Allen Bradley 842E series ultra-high resolution EtherNet/IP absolute encoders provide dual-port Ethernet and M12 connectors. The 842E series encoders are designed for high performance and reliability in harsh industrial environments. Encoders include an embedded EtherNet/IP switch to connect additional Ethernet/IP ...