Kubler Incremental Encoder 500 ppr 6 x 12.5 mm Shaft 10 30 V dc

  • RS-stocknr. 918-9064
  • Fabrikantnummer 8.KIS40.1342.0500
  • Fabrikant Kubler
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

KIS40 Incremental Encoder

Professional range of Kubler incremental encoders from the KIS40 series. The encoders have optical technology that has been designed for high-cost effectiveness. Resolutions of up to 2500 Pulses per revolutions available. The encoders are ideal for tight mounting spaces and small machines and appliances.

Radial Cable
Push-Pull or RS422 output circuit

Specificaties
Kenmerk Waarde
Pulses Per Revolution 500
Encoder Technology Incremental
Output Signal Type Push Pull
Shaft Type Solid
Supply Voltage 10 30 V dc
Shaft Diameter 6mm
IP Rating IP64
Overall Width 40mm
Overall Depth 61.3mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Switching Frequency 250 (Pulse) kHz
Series KIS40
Mounting Type Synchro Flange
Current Rating 100 mA
29 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
122,00
(excl. BTW)
147,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 122,00
Related Products
Linear measurement devices (metric) for linear measurement of ...
Description:
Linear measurement devices (metric) for linear measurement of running materialUsed with 716 single preset counter (stock no. 309-6111) or 717 dual preset (stock no. 309-6155)The transducer does not require an additional power supply as it can be supplied directly from ...
13 or 17 bit resolutionSSI Gray + Quadrature ...
Description:
13 or 17 bit resolutionSSI Gray + Quadrature 1Vp-pOptical encoder with a true geared multiturnOperating temperature: -40 to 120°CPCB connector 12 pole radial 0,5m cable.
EM14 series 14 mm rotary optical encoders with ...
Description:
EM14 series 14 mm rotary optical encoders with a compact package size, splashproof shaft seal, high rotational life cycle and HCMOS, CMOS and TTL compatability. These EM14 series rotary optical encoders are available with detent (stock number 789-9497) and standard ...
EIL580 incremental encoders with solid shaft, with clamping ...
Description:
EIL580 incremental encoders with solid shaft, with clamping or synchro flange. Stainless steel solid shaftDie-cast aluminium housingPrecise optical sensingAxial, radial or tangential connectionHigh resistance to shock and vibrations58 mm diameterProgrammable output signal level (TTL or HTL).