Rotary Switch Spacer for use with MU-MA Series, MU-MK, MU-MK Series

  • RS-stocknr. 352-272
  • Fabrikantnummer 221995-000-003-000
  • Fabrikant NSF
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Spacers for Miniature & Standard Shaft Assemblies

For use where wide separation of wafers or screens is required
Use stk no. 352-272 for Miniature shaft assemblies
Use stk no. 327-872 & 327-888 for Standard shaft assemblies

Specificaties
Kenmerk Waarde
Accessory Type Spacer
For Use With MU-MA Series, MU-MK, MU-MK Series
90 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Box of 10)
0,332
(excl. BTW)
0,402
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
10 - 90
€ 0,332
€ 3,32
100 - 240
€ 0,295
€ 2,95
250 - 490
€ 0,259
€ 2,59
500 - 1990
€ 0,206
€ 2,06
2000 +
€ 0,159
€ 1,59
*prijsindicatie
Related Products
Double-spring detent mechanisms in standard sizeLife expectancy >100000 ...
Description:
Double-spring detent mechanisms in standard sizeLife expectancy >100000 detent operations30° indexing and adjustable end stopsTakes up to 10 standard wafers (the capacity is reduced if spacers and/or screens are used)6mm diameter shaft and M10 x 0.75 mounting bushesOverall length 190mm, ...
This selection of flat switches for direct soldering ...
Description:
This selection of flat switches for direct soldering to printed circuit boards are low profile, with a mounting height of less than 10.4mm. The rotary wafer switches and spacers are stackable up to five wafers per switch, and can be ...
This spacer kit is for use with rotary ...
Description:
This spacer kit is for use with rotary wafer switches. • 10 x Insulated Spacers (6.35mm)• 2 x Front Insulators• 1 x Rear Driver Shafts (35.25mm)• 1 x Retaining Strap• 2 x Tie Rods• 2 x Push-On Fixings.
Gold-plated break-before-make contact Two up/down buttonsDecade, BCD and ...
Description:
Gold-plated break-before-make contact Two up/down buttonsDecade, BCD and HexadecimalModules may be separated by spacers and assembled between cheeksH 24mm, W 7.62mm, D 32mmCheeks and spacers available separatelyCut out, 22.5 by [(no. of switches x 7.62) x (no. of spacers x ...