Lorlin, 3 Position 4P Rotary Switch, 150 mA @ 250 V ac, Through Hole

  • RS-stocknr. 665-219
  • Fabrikantnummer CK1052
  • Fabrikant Lorlin
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Midget Wafer Switch - CK Series

A metric selection of Lorlin CK rotary switches with various switch configurations. These panel mount, single wafer rotary switches have silver plated contacts and adjustable rotation limit stops, apart from stock number 739-2921 which featurers a non stop continuous rotation.

Contacts rated 150mA @ 250Vac/dc
PCB terminals
Proof voltage 1500Vac
UL-VO rated 27.5mm diameter body
30º indexing
Non-shorting BBM (break before make) contacts
Adjustable stop and continuous rotation options
Metric shaft 50mm long, 6mm diameter spindle with no flat for easy mounting of collet knobs. The bush is 8mm long with a M10x0.75mm thread

Note

For solder terminal versions see stock number 739-2930 typically.

//media.rs-online.com/t_line/LD665180-01.gif
Specificaties
Kenmerk Waarde
Contact Configuration 4P
Contact Current Rating 150 mA @ 250 V ac
Number of Switch Positions 3
Number of Contacts 4
Voltage Rating 250 V ac, 250 V dc
Depth 27.5mm
Width 27.5mm
Mounting Type PCB
Terminal Type Through Hole
Minimum Operating Temperature -30°C
Contact Material Silver Plated Brass
Height 68.1mm
Maximum Operating Temperature +85°C
52 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
61 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,00
(excl. BTW)
3,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 3,00
50 - 99
€ 2,64
100 +
€ 1,56
Related Products
Double-spring detent mechanisms in standard sizeLife expectancy >100000 ...
Description:
Double-spring detent mechanisms in standard sizeLife expectancy >100000 detent operations30° indexing and adjustable end stopsTakes up to 10 standard wafers (the capacity is reduced if spacers and/or screens are used)6mm diameter shaft and M10 x 0.75 mounting bushesOverall length 190mm, ...
A rotary switch mechanism with adjustable stop which ...
Description:
A rotary switch mechanism with adjustable stop which will take up to a maximum of five extra wafers from the variety availableA spacer kit is available to maintain a 6.35mm pitch between individual wafersTerminal spacing is on a 2.54mm pitch. ...
Wafer switches.Perpendicular outputs for printed circuits with a ...
Description:
Wafer switches.Perpendicular outputs for printed circuits with a pitch of 2.54 mm.Non-short circuiting contacts.These additional wafers can be mounted on any PT series switching assembly detailed previously (30° indexing).The wafers are separated by a spacer 7.62 mm thick available to ...
Rotary switches for panel mounting, with a 6 ...
Description:
Rotary switches for panel mounting, with a 6 mm diameter shaft.Solder terminals.Available in four versions.Additional wafers can be ordered separately.PT series accessories must be used to fit additional wafers (extension shafts, spacers and washers).Buttons are also available in the catalogue. ...