- RS-stocknr.:
- 905-8809
- Fabrikantnummer:
- 75920
- Fabrikant:
- Cole Hersee
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-04-2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 68,31
(excl. BTW)
€ 82,66
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 68,31 |
5 - 9 | € 61,89 |
10 - 19 | € 57,46 |
20 + | € 55,95 |
- RS-stocknr.:
- 905-8809
- Fabrikantnummer:
- 75920
- Fabrikant:
- Cole Hersee
Datasheets
Wetgeving en compliance
- Land van herkomst:
- MX
Productomschrijving
Master Battery Disconnect Switch, 75920 Series
The 79520 series master battery disconnect switch offers protection against battery drain and theft. It also allows personnel to Lock-Out Tag-Out by using a Hasp Lockout system or a suitable padlock. It can also be effectively used as an emergency power cut-off switch protecting personnel and vehicle systems.
Designed for heavy-duty applications, these units are able to handle up to 300 A at 12 V dc. They are sealed to IP68 standards allowing them to be mounted in exposed locations. They are manufactured in a polymer housing and will not rust or corrode allowing them to be used in almost any environment.
Designed for heavy-duty applications, these units are able to handle up to 300 A at 12 V dc. They are sealed to IP68 standards allowing them to be mounted in exposed locations. They are manufactured in a polymer housing and will not rust or corrode allowing them to be used in almost any environment.
Potential Applications
Heavy Truck
Off-Road
Emergency Vehicles
Material Handling
Mining
Agricultural
Marine
Construction
Off-Road
Emergency Vehicles
Material Handling
Mining
Agricultural
Marine
Construction
Features and Benefits
High amperage capacity: 300 A at 12 V dc
Can be used in high side or low side applications
Ingress protection: IP68
Rust proof and non-corrosive construction
Tested per SAE 1455 for salt, calcium chloride and magnesium chloride
Large red knob is easy to operate with gloves
90° switch travel makes it easy to identify the switch position
Large divider on base prevents accidental shorting of high energy cables
Fits standard Master Disconnect mounting pattern
Operating temperature range: -40°C to +85°C
Can be used in high side or low side applications
Ingress protection: IP68
Rust proof and non-corrosive construction
Tested per SAE 1455 for salt, calcium chloride and magnesium chloride
Large red knob is easy to operate with gloves
90° switch travel makes it easy to identify the switch position
Large divider on base prevents accidental shorting of high energy cables
Fits standard Master Disconnect mounting pattern
Operating temperature range: -40°C to +85°C
Specificaties
Kenmerk | Waarde |
---|---|
Mounting Type | Threaded |
IP Rating | IP67 |
Voltage Rating | 12V |
Handle Colour | Black |
Width | 136.7mm |
Maximum Operating Temperature | +85°C |
Minimum Operating Temperature | -40°C |
Terminal Type | Screw |