- RS-stocknr.:
- 422-6335
- Fabrikantnummer:
- 100S-C09KD23C
- Fabrikant:
- Allen Bradley
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 422-6335
- Fabrikantnummer:
- 100S-C09KD23C
- Fabrikant:
- Allen Bradley
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CH
Productomschrijving
100S-C, 3 Pole Safety Contactors 2N/O & 3N/C
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts.
Redundant contactors to isolate motor (hazardous motion)
Positively guided main contacts
Red contact housings for easy identification as safety device
Protective cover prevents manual operation - yet the window allows visible ON/OFF status
Positively guided main contacts
Red contact housings for easy identification as safety device
Protective cover prevents manual operation - yet the window allows visible ON/OFF status
Note
DC versions incorporate a diode protection circuit
Allen Bradley 3-Pole Safety Contactor, 110V AC Coil, 9A - 100S-C09KD23C
Want to improve the safety of your commercial circuits? This 3-pole contactor from Rockwell Automations Allen Bradley range is specifically designed for safe power switching. It comes complete with a protective shell, red exterior covers for safety indication and a clear window for visible status. The contactor cant be manually controlled and is ideal for use in safeguarded motors or lighting systems. A state configuration of 5NO (normally open) and 3NC (normally closed) contacts ensures unchanging status when a power pole welds.
• Screw-terminal for quick and easy installation• Forked auxiliary with gold plating for use with low-energy applications• Compact dimensions of 81 (length) x 45 (width) x 119.5mm (depth), saving space in your setup• Wide operating temperature range of -25°C to +60°C for safe use in tough environments
Standards and Certifications
• CE (Conformité Européenne)• UL (Underwriters' Laboratories)• CSA (Canadian Standards Association)• RINA (Registro Italiano Navale)• IEC 61340-5 (International Electrotechnical Commission)• EN 61340-5 (European Norm)
What applications are safety contactors used for?
You'll often find safety contactors in factory equipment as they're designed to protect systems and the handlers who use them. You can use them in low-energy motors, pumps and lighting setups, as well as other machinery requiring switch-on and switch-off capabilities.
Safety Contactor
Specificaties
Kenmerk | Waarde |
---|---|
Coil Voltage | 110 V ac |
Number of Poles | 3 |
Contact Voltage Rating | 525 V ac |
Contact Current Rating | 9 A |
Series | 100S-C |
Function | Safety |
Normal State Configuration | 5NO + 3NC |
Auxiliary Contact Configuration | 2NO + 3NC |
Number Of Auxiliary Contacts | 5 |
Terminal Type | Screw |
Length | 81mm |
Width | 45mm |
Depth | 119.5mm |
Pole and Throw Configuration | 3P |
Maximum Operating Temperature | +60°C |
Minimum Operating Temperature | -25°C |