100S-C 3P Safety Relays, 24 V dc, 23 A, 690 V ac

  • RS-stocknr. 776-8475
  • Fabrikantnummer 100S-C23EJ23C
  • Fabrikant Allen Bradley
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

100S-C, 3 Pole Safety Contactors 2N/O & 3N/C

The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts.

Redundant contactors to isolate motor (hazardous motion)
Positively guided main contacts
Red contact housings for easy identification as safety device
Protective cover prevents manual operation - yet the window allows visible ON/OFF status

Note

DC versions incorporate a diode protection circuit

//media.rs-online.com/t_line/L422632-01.gif

Allen Bradley Safety Contactor

The Allen Bradley 100S-C series safety contactor has a 3-pole and current rating of 23A. It has 2NO and 3NC contact configuration. The coil voltage rating is 24VDC. This contactor has mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N. C. auxiliary contacts do not change their state when a power pole welds. The gold: plated bifurcated auxiliary contacts are ideal for low: energy applications. This device is ideal for feedback control circuits with multiple series: connected N. C. auxiliary contacts.

Note:
DC versions incorporate a diode protection circuit

Features and Benefits

• Redundant contactors to isolate motor (hazardous motion)
• Positively guided main contacts
• Red contact housings for easy identification as safety device
• Protective cover prevents manual operation, yet the window allows visible on/off status
• Contact voltage rating of 690VAC.

Certifications


CE certified
• UL listed
• CSA certified
• RINA certified
• IEC60947
• EN60947

Safety Contactor

Specificaties
Kenmerk Waarde
Number of Contacts 3
Series 100S-C
Pole and Throw Configuration 3P
Normal State Configuration 2NO/3NC
Number Of Auxiliary Contacts 5
Auxiliary Contacts 2NO/3NC
Contact Current Rating 23 A
Contact Voltage Rating 690 V ac
Coil Voltage 24 V dc
Length 81mm
Width 45mm
Depth 125.5mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Dimensions 81 x 45 x 125.5 mm
22 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
189,00
(excl. BTW)
228,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 189,00
Related Products
The 3-Pole ABB Jokab safety contactor relay has ...
Description:
The 3-Pole ABB Jokab safety contactor relay has a coil voltage 24VAC to 60VAC at 50/60Hz and 20 to 60VDC. It has a contact current rating 30A and contact voltage rating 600VAC. It reduces panel energy consumption. It is with ...
The DILAS safety relay, available in three different ...
Description:
The DILAS safety relay, available in three different coil voltages, rounds out Eaton’s product range in this area. The following drive options are available: 110V 50Hz, 120V 60Hz, 230V 50Hz, 240V 60Hz, 24VDC (RDC24). The contactor’s yellow cover allows for ...
The SIRIUS 3TK28 5 safety relay combines solid-state ...
Description:
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals. Enabling circuits, ...
The SIRIUS 3TK28 5 safety relay combines solid-state ...
Description:
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals. Enabling circuits, ...