Preventa XPS MC Series Safety Controller, 32 Safety Inputs, 10 Safety Outputs, 24 V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

XPS MC, Configurable Safety Controllers, Base Units

Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs.

8 control inputs as standard
LEDs on the front face enable simple and visual diagnostics
Communication via Modbus
30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)
Required safety function can be selected after receipt of the product.

Note

Stock numbers 464-946 and 464-930 are starter kits. These contain the safety controller, XPS-MCWIN configuration software, USB to 8 pin male connector cable, 8 pin female mini DIN to RJ45 cable, sub 25 way male connector to RJ45 cable, cage clamp terminal set and screw clamp terminal set
To connect XPS-MC to a PC for programming and diagnostic purposes:
Laptop PC with 9 pin serial port: use RS 382-2645 and 544-490
Laptop PC with USB port: use RS 464-962 and RS 218-080

Specificaties
Kenmerk Waarde
Range Preventa
Series XPS MC
Number of Safety Inputs 32
Number of Safety Outputs 10
Safety Category 4
SIL SIL 3
Supply Voltage 24 V dc
Contact Current Rating 10 mA
IP Rating IP20
Depth 153mm
Dimensions 151.5 x 74 x 153 mm
Length 151.5mm
Width 74mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2.165,00
(excl. BTW)
2.619,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.165,00
Related Products
One system covers both safety-related (E-stop, light curtain ...
Description:
One system covers both safety-related (E-stop, light curtain etc) and standard control functionsEconomical non-expandable solutionSimple wiring means short commissioning timesSimple intuitive programming resulting in time and cost savingFlexible to apply, as only one solution required for applications up to ...
Flexi Soft is a programmable and modularly expandable ...
Description:
Flexi Soft is a programmable and modularly expandable safety controller capable of being integrated into various networks. The main module FX3-CPU is the CPU of the entire system within which all input signals are monitored and processed via the safety ...
Economical, Type 4 safety light curtain designed for ...
Description:
Economical, Type 4 safety light curtain designed for small assembly machines in ambient operating environments, or where mounting space is limited. Connection to an MSR42 controller (stock number 703-4987), improves flexibility for applications requiring two or three light curtains or ...
The PNOZmulti Mini configurable safety relay from Pilz ...
Description:
The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A ...