JSHD Series Safety Switch, 3 Position, IP65

  • RS-stocknr. 733-2307
  • Fabrikantnummer 2TLA020001R1000
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Enabling Switch, JSHD Series

The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC.

Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible
Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information
Mechanical life of 1000000 cycles to the middle position
The body material consists of Polyamide 6.6
Operating force of approximately 15 N
High protection class rating of IP65
Insulation resistance of a minimum of 20 MΩ

Approvals

CE, CSA

ABB Safety Enabling Switch

The ABB JSHD series is a safety enabling switch that facilitates safe operation of machinery via a 3-position control device. This product is available in different versions for a wide variety of application uses. It has a supply voltage rating of 30V and a current rating of 500mA. This series is enabled with key features from ABB Jokab such as a front button (for programme start, low speed, and more), a top button (for programme stop, grip devices, and more), a bottom plate (wide bottom plate for fixing interlocking devices), Eden (non-contact sensor or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), and LED indication. Additionally, this device is designed to work with a safety relay or PLC.

Features and Benefits


Multiple uses in troubleshooting, test running, and programming where no other protection is available or feasible
• Key advantages of the JSHD4 enabling device include it being ergonomic, as well as adaptable and the device provides LED status information
• Mechanical life of 10,00,000 cycles to the middle position
• The body material consists of polyamide 6.6
• Operating force of approximately 15N
• High protection class rating of IP65
• Insulation resistance of a minimum of 20MΩ

Certifications


CE certified
• CSA certified
• IP65 rated

Enabling Switch

Specificaties
Kenmerk Waarde
Series JSHD
Number of Positions 3
Supply Voltage 30 V
Supply Current 500 mA
IP Rating IP65
Connection Type Cable
Reset Method Push to Release
Housing Material Nylon 6.6
Dimensions 26.55 x 20.7 x 13.5 mm
Depth 13.5mm
Width 20.7mm
Length 26.55mm
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
59 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
35,90
(excl. BTW)
43,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,90
Related Products
The IN4000 inductive safety switch is used for ...
Description:
The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not require a separate coded actuator. Due to the non-contact form of operation, this ...
XPS-VC switches XY2AU used in conjunction with the ...
Description:
XPS-VC switches XY2AU used in conjunction with the XPS-VC safety relay offer a certified safety solution ensuring the safety of machine operators during setting and maintenance operationsUse while carrying out adjustment of moving partsAllows operators to enable start and stop ...
The D4B-N Safety Limit Switch from Omron has ...
Description:
The D4B-N Safety Limit Switch from Omron has snap-action contacts with a certified direct opening mechanism, N/C contacts only, to ensure safe operation should a fault occur. The switch is housed in an aluminium die-cast enclosure and has the head ...
3 positive opening contacts as standard (on guard ...
Description:
3 positive opening contacts as standard (on guard opening)A key operated lock enables positive locking of the guardOptional version with orange LED to indicate guard open/closedHeavy duty metal DIN styleTurret heads can be rotated through 360° in 90 steps8 actuator ...