Pilz 24 V ac/dc Safety Relay Dual Channel With 2 Safety Contacts

  • RS-stocknr. 239-1049
  • Fabrikantnummer 774303
  • Fabrikant Pilz
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

PILZ PNOZ X2 Safety Relay, Multi-Channel (Dual)

The PNOZ X2 series from PILZ offering reliable performance to your safety circuitry. Confidence in monitoring your safety circuits has never been easier than with the use of a PILZ X2.

Features and benefits

• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Several connection options are available for ESTOP pushbuttons, Safety gates & reset buttons.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Suitable for DIN rail mounting
• The safety function will remain effective in the case of a component failure
• Monitored manual reset is an option with this relay

Safety features

• The circuit is redundant with built in self-monitoring

Applications

• Emergency stop buttons
• Safety curtains
• External relay/contactor monitoring
• Safety switch/interlocks

Specificaties
Kenmerk Waarde
Supply Voltage 24 V ac/dc
Number of Channels 2
Function Light Beam/Curtain, Safety Switch/Interlock
Safety Contacts 2
Range PNOZ X
Reset Method Manual
Terminal Type Screw
Width 22.5mm
Length 87mm
Depth 121mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
89 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
144,40
(excl. BTW)
174,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 144,40
Related Products
Detects the stop condition of all types of ...
Description:
Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required1 N/O and 1 N/C contacts, EN954-1 Category 3 ...
The Schneider Electric XPS-ATE range of safety modules ...
Description:
The Schneider Electric XPS-ATE range of safety modules have been created and designed to be used for monitoring emergency stop circuits. They provide protection for both machines and operators through immediately stopping the dangerous movement on receipt of a stop ...
Safety relay for emergency stop, safety doors, 1- ...
Description:
Safety relay for emergency stop, safety doors, 1- or 2-channel operation, cross-circuit detection, can be retriggered, fall back/tightening delay 0.2 s to 60 s, 2 enabling current paths, US = 24 V DC, plug-in spring-cage terminal block. Low housing width ...
The P2HZ X1 series of Safety Relays by ...
Description:
The P2HZ X1 series of Safety Relays by PILZ offer you affordable and reliable feedback control loops, specifically designed to handle the monitoring of your external relays or contactors. • Specially designed for two handed control/operation. The P2HZ series will ...