Pilz 24 V dc Safety Relay Single or Dual Channel With 3 Safety Contacts and 1 Auxilary Contact

  • RS-stocknr. 239-1083
  • Fabrikantnummer 774340
  • Fabrikant Pilz
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

PILZ P2HZ X1, Two Hand Monitoring, Type IIIC

The P2HZ X1 series of Safety Relays by PILZ offer you affordable and reliable feedback control loops, specifically designed to handle the monitoring of your external relays or contactors.

Features and benefits

• Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement.
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)
• Reactivation: The outputs will no re-energise unless both operator elements have been released and then re-operated simultaneously.
• Suitable for DIN rail mounting
• Durable and has an extended service life vs. competitors

Safety features

• The relay will provide the circuit self-monitoring.
• The safety functions of the device remain in effect even in the case of component failures.
• The relay will prevent the circuit from further press strokes in the case of, relay failures, contact welding, coil defects or open/short circuits.

Applications

• Mechanical presses
• Hydraulic presses
• General safety circuits (in accordance with EN 60204-1)

Technical safety parameters

• EN 60204-1
• EN 954-1
• EN (IEC) 62061
• EN ISO 13849-1
• IEC 61511 – SIL 3

Standards

EN574 (type III C)

//media.rs-online.com/t_line/L239108-01.gif

Standards

PREN 574

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 1, 2
Auxiliary Contacts 1
Function Two-Hand Control
Safety Contacts 3
Range PNOZ X
Terminal Type Screw
Length 87mm
Depth 121mm
Width 45mm
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
464,50
(excl. BTW)
562,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 464,50
Related Products
The Bulletin 100S-C safety contactors provide mechanically linked ...
Description:
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary ...
The easySafety ES4P safety control relay monitors and ...
Description:
The easySafety ES4P safety control relay monitors and evaluates safety-related information from safety devices such as position switches, light curtains, two-hand controls and emergency-stop buttons. The simple operation and variable configuration of the safety and control functions guarantee quick error ...
The Guardmaster CR30 Starter Pack contains all the ...
Description:
The Guardmaster CR30 Starter Pack contains all the necessary components to set-up a basic safety system, ideal for example, as a proof of concept.The main component of the kit is the flexible, cost effective and user friendly software configurable safety ...
The MatGuard safety mat is a pressure-sensitive safeguarding ...
Description:
The MatGuard safety mat is a pressure-sensitive safeguarding product that is designed to detect the presence of people on its sensing surface.The MatGuard safety mat has two conductive hardened steel plates that are held apart by non-conductive compressible separators. Each ...