Dold 24 V dc Safety Relay With 2 Safety Contacts Compatible With Emergency Stop

  • RS-stocknr. 240-8850
  • Fabrikantnummer BA7924.21 DC24V 1-10s
  • Fabrikant Dold
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

BA7924.21 delay module

Adjustable off delay
No auxiliary voltage
Output: 1 NC, 1 force guided NO
LED to display switch position
Delayed switch-off in safety-oriented circuits
(EU Directive for machines 89/392/EEC, IEC 255, DIN VDE 0435)

Standards

EN 60204-1 (stop functions), EN 418, prEN574, prEN 954-1

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Function Emergency Stop
Safety Contacts 2
Range Safemaster
Width 45mm
Length 74mm
Depth 133mm
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
128,03
(excl. BTW)
154,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 128,03
Related Products
The Bulletin 100S-C safety contactors provide mechanically linked ...
Description:
The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary ...
Relay module with driven contacts, Nominal input voltage: ...
Description:
Relay module with driven contacts, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm. Reinforced insulation between coil and contactsA separator plate (e.g., 209-191) must be used for voltages ...
Relay module, Nominal input voltage: 24 VDC, 2 ...
Description:
Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Green status indicator, Module width: 15 mm. Reinforced insulation between coil and contactsA separator plate (e.g., 209-191) must be used for voltages greater than 250 ...
Ensures motor movement is at a preset limit ...
Description:
Ensures motor movement is at a preset limit before an output signal is givenFor use with guard locking interlock switchesFault tolerant principle control unitMonitors contactor operationDimensions: H73 x W45 x D120mm.