Pilz 24 V dc Safety Relay Dual Channel With 8 Safety Contacts and 1 Auxilary Contact Compatible With Expansion Module

  • RS-stocknr. 245-1955
  • Fabrikantnummer 774150
  • Fabrikant Pilz
Wetgeving en compliance
Land van herkomst: DE

PZE 9 24VDC 8n/o Safety Relay Expansion from PILZ

The PILZ PZE 9, primarily used for increasing the number of contacts you can use between your safety related control devices such as E stops, safety gates and more. The reliability Safety Relay technology from PILZ means you can control your environment with confidence that the safety status is being monitored.

Features and benefits

• Universal power supply, compatible with many different outlets of power sources
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Plug in terminal connections with either a spring loaded terminal or screw terminal giving you versatility in where your unit can be used.
• Feedback loop monitoring come with all base units allowing you to monitor the safety loop and identify hazards before they happen.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

Safety features

• Earth fault in the feedback loop can be detected depending on the base unit that is used
• Earth faults in the input circuit can be detected as the output will de-energise the relays and open the safety contacts.
• The device will retain its safety functions in any case of component failures ensuring your safety.
• Any safety functions in your existing circuit can be easily transferred with this expansion module with ease.
• Detection of shorts across contacts is possible with this expansion model


• Guard systems
• Emergency stop buttons
• Pull wire emergency stop switches
• Safety light curtains
• Safety sensors

Technical safety parameters

• EN 60204-1
• EN 62061
• EN ISO 13849-1
• VDE 0113-1


All base units must have a feedback control loop


60204-1; EN60947-4-1; EN60947-5-1

Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 2
Auxiliary Contacts 1
Function Expansion Module
Safety Contacts 8
Range PNOZ X
Terminal Type Screw
Length 87mm
Width 90mm
Depth 121mm
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
26 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 227,20
Related Products
Stop-Category 0 acc. EN 60204-1Applications up to Category ...
Stop-Category 0 acc. EN 60204-1Applications up to Category 4 acc. EN 954-1 or to SIL 3 respectively according to EN 62061 and PL e accoring to EN13849-1Can be used as emergency stop and safety gate monitorEach unit offers manual or ...
Professional range of IDEM VIPER Safety Relays with ...
Professional range of IDEM VIPER Safety Relays with screw terminals. The safety relays incorporate expansion units. The relays can be directly wired to increase the number of safety output contacts. Designed to meet the latest safety standard and offer enhanced ...
DIN rail mountingFor use with powered shot bolt ...
DIN rail mountingFor use with powered shot bolt applicationsTime delay selectable in 12 steps (3-30 secs)1 N/O safety contact, 2 N/C auxiliary contactsFeedback control loop for monitoring of external devices.
Machine emergency stop switchesMonitoring sliding grill guardsSK 4 ...
Machine emergency stop switchesMonitoring sliding grill guardsSK 4 (with equivalent switching)Ultra compact unit (width 45 mm)Output: 3 N/Os, 1 N/C1 or 2-channel configurationLine termination detection on the ON buttonProgrammable: cross-fault detection in emergency stop-control loopProgrammable: automatically ...