Pilz 24 V dc Safety Relay Single Channel With 4 Safety Contacts Compatible With Expansion Module

  • RS-stocknr. 362-0168
  • Fabrikantnummer 774585
  • Fabrikant Pilz
Wetgeving en compliance
Land van herkomst: DE

PZE X4 24VDC 4n/o Safety Relay from PILZ

The PILZ PZE X4 is primarily used for increasing the number of contacts you can use between your safety related control devices such as E stops, safety gates and more. The reliability Safety Relay technology from PILZ means you can control your environment with confidence that the safety status is being monitored.

Features and benefits

• Universal power supply, compatible with many different outlets of power sources
• LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage
• Plug in terminal connections with either a spring loaded terminal or screw terminal giving you versatility in where your unit can be used.
• Feedback loop monitoring come with all base units allowing you to monitor the safety loop and identify hazards before they happen.
• Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time)

Safety features

• Earth fault in the feedback loop can be detected depending on the base unit that is used
• Earth faults in the input circuit can be detected as the output will de-energise the relays and open the safety contacts.
• The device will retain its safety functions in any case of component failures ensuring your safety.
• Any safety functions in your existing circuit can be easily transferred with this expansion module with ease.


• Guard systems
• Emergency stop buttons
• Pull wire emergency stop switches
• Safety light curtains
• Safety sensors

Technical safety parameters

• EN 60204-1
• EN 62061
• EN ISO 13849-1
• VDE 0113-1


All base units must have a feedback control loop


BG, UL listed for Canada and US


BG, UL listed for Canada and US

Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 1
Function Expansion Module
Safety Contacts 4
Range PNOZ X
Reset Method Automatic
Terminal Type Screw
Depth 121mm
Width 22.5mm
Length 87mm
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 122,80