Schneider Electric 230 V ac Safety Relay With 2 Safety Contacts and 1 Auxilary Contact Compatible With Two-Hand Control

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

XPS BCE Series for Two Hand Control, Type IIIC

Incorporates relay outputs for two hand control applications
Compact and robust design
The enclosure has a protection class rating of IP40 and the terminals are protected to IP20
To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within an interval of less than 0.5 s (synchronous activation)
Three LEDs to indicate control/fuse supply, feedback loop and safety output contact status
PL e/Category 4 conforming to EN/ISO 13849-1, SILCL 3 conforming to EN/IEC 62061
Cage clamp and pluggable versions are available

Approvals

UL, CSA, BG

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
Auxiliary Contacts 1
Function Two-Hand Control
Safety Contacts 2
Range Preventa
Terminal Type Cage Clamp
Width 22.5mm
Length 111mm
Depth 114mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was € 333,20
299,88
(excl. BTW)
362,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 299,88
Related Products
The Bernstein AG 2NO 24VDC SCR relay is ...
Description:
The Bernstein AG 2NO 24VDC SCR relay is housed in a slim-line DIN rail polyamide material housing. The SCR relay is used to monitor the correct position and reliable operation of inputs from the safety sensors or safety switch contacts. ...
The PNOZ X1 series from PILZ is a ...
Description:
The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner. • Specially designed for two handed control/operation. The P2HZ series will not ...
For use in controls of metal working presses ...
Description:
For use in controls of metal working presses and other processing machines with dangerous lock movements (conforms to EC directive for machines 89/392/EEC, safety regulations for two-hand circuits on ZH 1-456 power-driven metal work presses). IV quality level compliant with ...
Ensures motor movement is at a preset limit ...
Description:
Ensures motor movement is at a preset limit before an output signal is givenFor use with guard locking interlock switchesFault tolerant principle control unitMonitors contactor operationDimensions: H73 x W45 x D120mm.