- RS-stocknr.:
- 122-6705
- Fabrikant:
- RS PRO
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-05-2024, met een levertijd van 1 werkdag.
Prijs Per stuk
€ 127,70
(excl. BTW)
€ 154,52
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 127,70 |
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
Carroll & Meynell Single Phase 1.65kVA Site Transformer, 230V ac Primary, ±55V ac Secondary, 10A O/P
- RS-stocknr.
- 260-4294
Prijs Per stuk
€ 238,36
(excl. BTW)
€ 288,42
(incl. BTW)
- RS-stocknr.:
- 122-6705
- Fabrikant:
- RS PRO
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
RS PRO Safety Isolating Transformers 230V ac-110V ac
This safety transformer from our own RS PRO brand is high quality, UK manufactured to BSEN (British Standard European Norm) 61588 and fully compliant with reduced low voltage regulations.
Applications
Safety transformers are most commonly used for increasing low AC voltages at high current or decreasing high AC voltages at low current in electric power applications, and for coupling stages of signal processing circuits.
Safety transformers could be used for isolation, transmission, distribution and utilization of alternating current electric power
Safety transformers could be used for isolation, transmission, distribution and utilization of alternating current electric power
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO seal of approval if were confident of their exceptional quality, which means you can be confident too.
Standards
BS EN 61558, BS EN 61558-20-23, BS EN 60529 ,RoHS Directive 2011/65/EU
Features and Benefits
• Glass reinforced polyester (GRP) case providing protection to IP44
• 110V centre tapped to earth (CTE) secondary winding
• 10amp thermal magnetic trip (hand resettable) reducing the chance of overload
• 2x 16A 110V Sockets
• Thermal overload protection
• Intermittent rating: maximum ration for operating load at 25% duty cycle (5 minutes on / 15 minutes off)
• 2 metre input mains lead with 13A UK domestic plug
• 110V centre tapped to earth (CTE) secondary winding
• 10amp thermal magnetic trip (hand resettable) reducing the chance of overload
• 2x 16A 110V Sockets
• Thermal overload protection
• Intermittent rating: maximum ration for operating load at 25% duty cycle (5 minutes on / 15 minutes off)
• 2 metre input mains lead with 13A UK domestic plug
Specificaties
Kenmerk | Waarde |
---|---|
Primary Voltage Rating | 230V ac |
Secondary Voltage Rating | 110 (55V-0V-55V)V |
Power Rating | 3.3kVA |
Output Current | 2 x 16A |
Plug Type | BS 1363 |
Socket Type | BS EN 60309 |
Weight | 18kg |
Length | 195mm |
Width | 195mm |
Depth | 265mm |
Dimensions | 195 x 195 x 265mm |
Mounting Type | Stand Alone |
Minimum Operating Frequency | 50Hz |
Maximum Operating Frequency | 60Hz |