Garmin Sat Nav GPS Sensor

Garmin GPS Sensor

The Garmin GPS 18x OEM sensor is a 12-parallel channel, WAAS-enabled GPS receiver. This high-sensitivity device is ideal for use in automotive, fleet vehicle and electronics applications that require a small, highly accurate GPS receiver. It also has real-time WAAS and RTCM enabled, so it can determine your location with high precision up to 3m without using an external DGPS beacon receiver. This is available in CMOS-level serial or USB 2.0 full-speed versions and comes with an integrated magnetic base. The puck-like receiver is 2.4in (6.1cm) in diameter and weighs just a few ounces, making it an ideal solution for applications where space efficiency is a priority. This sensor is offered in 3 different cable configurations. All the 3 versions of the GPS has non-volatile memory for storage of configuration information, a real-time clock and raw measurement output data for sophisticated customer applications.
Note:
RS Stock 445-090 - Cable length is 5m

Features and Benefits

DB-9 pin serial connector with a 12V cigarette lighter adapter
A-style USB connector
Compatible with USB 2.0 and 1.1 full-speed hosts
Provides a pulse-per-second logic-level output
GPS receiver tracks and uses multiple satellites for fast, accurate positioning and velocity estimates
May be remotely mounted in and out of the way location
Factory configuration meets the needs of most systems that expect NEMA 0183 data from a GPS receiver
Configuration commands are available to customise the NEMA 0183 output
Highly accurate one pulse per second output for precise timing measurements
Pulse width is configurable to 20 milliseconds increments from 20 milliseconds to 980 milliseconds with 1 microseconds accuracy
Configurable to binary format data output on COM1 port
Flexible input voltage levels of 3.3VDC to 6VDC with over voltage protection in the GPS 16xLVS and 8VDC to 40VDC in GPS 16xHVS
Flash based program with new software revisions available through web site download
Non-volatile memory does not require battery backup
Waterproof design allows continuous exposure to the prevailing weather conditions at most of the locations
5m cable length

Applications

Wireless communication
Embedded development
Automotive
Automation

Certifications

EN 64095:2002
EN 61000-6-1
EN 61000-6-3
EN 61000-6-4
EN 55022:1998
EN 60950-1:2001