RS PRO Electrolytic, Magnetic 22 mm Push-Fit Scale Inhibitor, 1.08L/s

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

CalCombi Mini Magnetic and Electrolytic Scale Inhibitor

This dual purpose unit can be fitted on the cold water mains to prevent limescale forming from any heating appliance such as a boiler, shower, or cylinder. The CalCombi Mini induces a single polarity into the water preventing the build up of limescale as per the current Building Regulations.

WRAS approved
Connections: 22 - 15mm push fit stem adaptors

Contents

Calcombi combination magnetic & electrolytic scale inhibitor.
Push fit fittings, 22mm unit fixed, 22-15mm stem adapters x 2 (including inserts).
Collet Clips x 2
Fitting instructions.
Lifetime Guarantee registration card.

Specificaties
Kenmerk Waarde
Scale Prevention Mechanism Electrolytic, Magnetic
Connection 22 mm Push-Fit
Maximum Flow Rate 1.08L/s
Connection Size 22mm
Thread Standard or Connection Type Push Fit
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 57,68
49,03
(excl. BTW)
59,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 49,03
5 +
€ 47,53
Related Products
Plugged into the main electrical 230 volt supply ...
Description:
Plugged into the main electrical 230 volt supply the electronic scale inhibitor draws power to the main control unit where it is passed through a 12v transformer and out to the aerial wires, wound around the pipework. Installed on incoming ...
This scale inhibitor unit which should be installed ...
Description:
This scale inhibitor unit which should be installed on cold water lines to prevent limescale from forming and to prolong the life of the system elements.The unit is supplied with fittings for a standard 15mm installation.
The CalGlow scale inhibitor combined magnetic & electrolytic ...
Description:
The CalGlow scale inhibitor combined magnetic & electrolytic dual purpose unit can be installed on both hot and cold water lines to prevent limescale from forming.The unit can be used on 22mm pipework. Maximum temperature: 100 °C.
The Inhibitor is a quick and efficient powerful ...
Description:
The Inhibitor is a quick and efficient powerful concentrate suitable for use with new and existing central heating systems. Designed for rapid application, inhibitor works on contact with sludge, limescale, flux and other debris reducing boiler noise and hydrogen gassing. ...