Calmag Polyphosphate 15 Scale Inhibitor, 30L/min, 7 bar

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

CalPhos Polyphosphate Scale and Corrosion Inhibitor

The CalPhos venturi system is easy to fit and quick to fill up. This robust inhibitor is effective in preventing the hard build-up on pipes, shower heads, washing machines, boilers and other devices connected to the mains water. The inhibitor works by passing water through calibrated nozzles, creating a suction of polyphosphates and water solution from the bowl. A proportional dose is then delivered into the water system and calcium is prevented from crystallising.
The polyphosphate cartridges are long-lasting, replaceable and are 100% compatible with drinking water.

The RS PRO CalPhos Replacment Cartridges (894-6960) are compatible with CalPhos Polyphosphate Scale Inhibitor (894-6951)

Features and Benefits:

• Proportionally dosing venturi system
• Low running costs
• Long cartridge life
• Head made of compound plastic with venturi flange
• Built-in bypass
• Vertical or horizontal installation
• See through glass - no waste
• Safe for drinking water and other foodstuffs

Product Application Information

Ideal for preventing calcium crystallisation in the water and forming a hard encrustation on pipes, boilers, shower heads, taps, washing machines and dishwashers, and so on.

Note

Pack of CalPhos replacement cartridges 8946960

Specificaties
Kenmerk Waarde
Scale Prevention Mechanism Polyphosphate
Connection 15
Maximum Flow Rate 30L/min
Maximum Working Pressure 7 bar
Connection Size 2 x 15mm
Thread Standard or Connection Type Compression
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
191,08
(excl. BTW)
231,21
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 191,08
Related Products
Plugged into the main electrical 230 volt supply ...
Description:
Plugged into the main electrical 230 volt supply the electronic scale inhibitor draws power to the main control unit where it is passed through a 12v transformer and out to the aerial wires, wound around the pipework. Installed on incoming ...
This scale inhibitor is a dual purpose unit ...
Description:
This scale inhibitor is a dual purpose unit which can be installed on both hot and cold water lines to prevent limescale from forming.The unit is supplied with fittings for a standard 15mm installation.
The CalGlow scale inhibitor combined magnetic & electrolytic ...
Description:
The CalGlow scale inhibitor combined magnetic & electrolytic dual purpose unit can be installed on both hot and cold water lines to prevent limescale from forming.The unit can be used on 22mm pipework. Maximum temperature: 100 °C.
This dual purpose unit can be fitted on ...
Description:
This dual purpose unit can be fitted on the cold water mains to prevent limescale forming from any heating appliance such as a boiler, shower, or cylinder. The CalCombi Mini induces a single polarity into the water preventing the build ...