NXP 74LVC2G17GV,125, Dual Schmitt Trigger Inverter, 1.65 → 5.5 V, 6-Pin TSOP

  • RS-stocknr. 136-2153
  • Fabrikantnummer 74LVC2G17GV,125
  • Fabrikant Nexperia
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Noisy signals? Get them clean with our Schmitt triggers. These devices are also useful for reshaping signals in complex layouts, and can prevent multiple switching when driven by slow edges. They feature a wide voltage supply range, input hysteresis, and CMOS and TTL variants

Prevents multiple switching when driven by slow edges
Cleans up the noisy signals
Reshapes the signals in complex layouts
Suitable for mixed 3.3 V and 5.0 V applications
Wide voltage supply range
Input hysteresis
Open drain output options
CMOS and TTL variants
Overvoltage tolerant input options

The 74LVC2G17 provides two non-inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals.Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in a mixed 3.3 V and 5 V environment.This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down

Wide supply voltage range from 1.65 V to 5.5 V
5 V tolerant input/output for interfacing with 5 V logic
High noise immunity
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD-8B/JESD36 (2.7 V to 3.6 V)
ESD protection:
 HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
24 mA output drive (VCC =3.0V)
 CMOS low-power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Multiple package options
Specified from 40 Cto+85 C and 40 Cto+125 C

Specificaties
Kenmerk Waarde
Logic Function Non-Inverting
Input Type Schmitt Trigger
Output Type TTL
Number of Elements per Chip 2
Schmitt Trigger Input Yes
Maximum Propagation Delay Time @ Maximum CL 13.1 ns @ 1.95 V
Mounting Type Surface Mount
Package Type TSOP
Pin Count 6
Logic Family 74LVC
Dimensions 3.1 x 1.7 x 1mm
Maximum Operating Temperature +125 °C
Length 3.1mm
Height 1mm
Minimum Operating Temperature -40 °C
Width 1.7mm
Minimum Operating Supply Voltage 1.65 V
Maximum Operating Supply Voltage 5.5 V
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (On a Reel of 3000)
0,065
(excl. BTW)
0,079
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 - 3000
€ 0,065
€ 195,00
6000 - 6000
€ 0,062
€ 186,00
9000 +
€ 0,059
€ 177,00
*prijsindicatie
Related Products
The 74AHCT series from Diodes Inc includes a ...
Description:
The 74AHCT series from Diodes Inc includes a variety of logic ICs such as standard logic gates, hex inverters, buffers and Schmitt trigger inverters. They are advanced high-speed range of CMOS devices with low power consumption. Supply Voltage Range: 4.5V ...
The Maxim SOT-23 package 6-pin I2C to 1 ...
Description:
The Maxim SOT-23 package 6-pin I2C to 1 wire bridge device translator that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform protocol conversion between the I2C master and any downstream 1-Wire slave devices. Relative ...
74AHC1G08 and 74AHCT1G08 are high-speed Si-gate CMOS devices. ...
Description:
74AHC1G08 and 74AHCT1G08 are high-speed Si-gate CMOS devices. They provide a 2-input AND function. The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V. The AHCT device has TTL input switching levels and ...
The 74HC32: 74HCT32 is a quad 2-input OR ...
Description:
The 74HC32: 74HCT32 is a quad 2-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Mixed 5 V and 3.3 V applicationsReduce time to market ...