TE Connectivity Angled D-sub Connector Backshell

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

AMPLIMITE .050 Series III Shielded Backshell Kits with Spring Latches for SCSI D-sub Connectors

AMPLIMITE .050 series III shielded SCSI (50 and 68 way) d-sub backshell kits consisting of and upper and lower backshell made from from zinc with nickel over copper plating, 2 x stainless steel spring latches, stainless steel 2-56 screws and 1 x tin over nickel plated strain relief staple. These AMPLIMITE .050 series III d-sub backshell kits are available in 2 straight exit styles and one angled exit style and accept a variety of cable diameters. (Please refer to table and datasheet on our website for details).

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Body Orientation Angled
Housing Material Zinc
8 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
11,06
(excl. BTW)
13,38
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 11,06
15 - 49
€ 10,04
50 +
€ 9,03
Verpakkingsopties
Related Products
A range of strain relief cable clamps for ...
Description:
A range of strain relief cable clamps for use with TE Connectivity standard rail and Quick Lock all metal shielded back shells. For compatible hoods see typical part numbers 139-0759, 139-1679 and 139-0769. The two part cable clamps offer a ...
Female screwlocks and screwlock kits for use with ...
Description:
Female screwlocks and screwlock kits for use with AMPLIMITE series HD, HDE, HDF and HDP Series d-sub connectors. These female screwlocks are made from cold rolled steel with a zinc plated clear or yellow chromate and come as individual screwlock ...
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.
The MHDM35 range of Die-Cast Zinc Hoods from ...
Description:
The MHDM35 range of Die-Cast Zinc Hoods from the MH MHulti Hood series feature a two piece zinc body with two body retaining screws. Unlike the standard MHDM series hoods, the MHDC35 range offer a 35° entry for angled and ...