TE Connectivity Amplimite .05 Series, 100 Way SCSI Connector Backshell for use with AMPLIMITE Subminiature D Connector

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

AMPLIMITE D-Sub Connector .050 Series III Shielded Backshell Kits with Jackscrews

AMPLIMITE .050 series III shielded d-sub backshell kits consisting of and upper and lower backshell made from from zinc with nickel over copper plating, 2 x stainless steel 2-56 male jackscrews, machine screws and 1 x tin over nickel plated strain relief staple.
50 way backshell kits accept a maximum cable O.D. of 10.16mm
68 way backshell kits accept a maximum cable O.D. of 13.97mm
100 way backshell kits accept a maximum cable O.D. of 12.70mm

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
For Use With AMPLIMITE Subminiature D Connector
Series Amplimite .05
Body Orientation Straight
Number of Contacts 100
Dimensions 84.46 x 15.62 x 52.88mm
Housing Material Zinc
Depth 52.88mm
Length 84.46mm
Maximum Operating Temperature +105°C
Minimum Operating Temperature -55°C
Width 15.62mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
17,52
(excl. BTW)
21,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 17,52
25 - 74
€ 15,14
75 - 199
€ 14,19
200 - 399
€ 13,74
400 +
€ 13,30
Verpakkingsopties
Related Products
Provides strain relief and mechanical protection on straight ...
Description:
Provides strain relief and mechanical protection on straight D-subminiature connector terminationsAn adhesive seal to the connector and cable entry can be obtained by use of a S1125 adhesive (stock nos. 239-1516 and 441-4352).
RFI / EMI shieldingDesign comprises two shell halvesMetal ...
Description:
RFI / EMI shieldingDesign comprises two shell halvesMetal cover caps are specially designed for shielded cablesScrews are supplied as a set with 2 units.
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits ...
Description:
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI ...
AMPLIMITE .050 Series III PCB d-sub receptacle headers ...
Description:
AMPLIMITE .050 Series III PCB d-sub receptacle headers with a compact space saving design and high density D type interface with 1.27 x 2.54 mm contact spacing. These AMPLIMITE .050 Series III PCB mount d-sub connectors have full shielding which ...