RS PRO White Silicone Sealant Paste 310 ml Cartridge

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BE
Productomschrijving

Non-Corrosive Silicone Sealant

One-component, room temperature curing silicone elastomer. Cross linking takes place in the presence of moisture in the air to form a flexible resilient silicone rubber.,The material does not evolve any corrosive volatiles, e.g. acetic acid, amines, during cure and is therefore suitable for use on copper, its alloys and other sensitive metals. This property also results in a very low odour emission compared to acetoxy grades. The thixotropic paste has excellent adhesion to most materials (except PTFE and polyethylene) and can withstand temperatures of -40°C to +150°C whilst still maintaining chemical resistance. Typical uses are protection of semiconductor junctions, finishing protection of assemblies and delicate devices, sealing to copper clad items.

Note

Not considered to be 'food safe'.

Approvals

Exceeds BS5713

Specificaties
Kenmerk Waarde
Colour White
Sealant Type Silicone Sealant
Application Copper, Semiconductor Junction Protection
Package Size 310 ml
Package Type Cartridge
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Food Processing Safe No
Chemical Type Elastomer
Physical Properties Neutral Cure, Non-Corrosive
Cure Time 7 (23 °C) days
Product Form Paste
Chemical Composition Stearic Acid
Tensile Strength 210N/cm
Hardness 32 Shore A
Odour Sweet
Specific Gravity 1.43
Operating Temperature Range -40 → +150 °C
Special Features Non Corrosive
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
297 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
16,81
(excl. BTW)
20,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 16,81
6 - 14
€ 16,13
15 +
€ 15,80
Related Products
High grade Marine silicone sealant for creating watertight ...
Description:
High grade Marine silicone sealant for creating watertight cosmetic sealsSuitable for applications above and below waterlineAppllications include sealing around portholes and hatches, sealing trunking or locking nuts and bolts against vibrationQuick skin, tack free and cure characteristicsUnrivalled adhesion to ...
3M™ Hybrid Adhesive Sealant 760 is a single ...
Description:
3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV. Excellent adhesionPaintable when wetAbove/below water line useLow VOC30 Minute skin time.
Single part high modulus, acetoxy curing silicone rubber ...
Description:
Single part high modulus, acetoxy curing silicone rubber sealantForms a waterproof, flexible seal which provides a good level of movement accommodationExcellent adhesion to most building surfacesSuitable for internal and external applicationsFor use over a wide temperature range; -60 to + ...
A one-component high temperature acetoxy silicone sealant. Withstands ...
Description:
A one-component high temperature acetoxy silicone sealant. Withstands temperatures of up to 250°C long term & 300°C short termTo 93/112/EC; 67/548/EEC; 88/379/EEC standardsMeets requirements of FDA regulation number 21CFR177.2600 for use in areas where food contact is likelyDistinctive red colouringIdeal ...