3M, Grey Paste in Cartridge (600 ml), operating temperature -40 → +100 °C

  • RS-stocknr. 146-3189
  • Fabrikantnummer 3M 760 grey 600ml
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV.

Excellent adhesion
Paintable when wet
Above/below water line use
Low VOC
30 Minute skin time

Specificaties
Kenmerk Waarde
Sealant Type Adhesive Sealant
Colour Grey
Package Size 600 ml
Package Type Cartridge
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Trade Name Adhesive Sealant 760UV
Cure Time 24 (>3.5 mm) h
Product Form Paste
Specific Gravity 1.61
Operating Temperature Range -40 → +100 °C
Odour Slight
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
23,49
(excl. BTW)
28,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 23,49
15 - 39
€ 22,56
40 +
€ 22,08
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
One-component, room temperature curing silicone elastomer. Cross linking ...
Description:
One-component, room temperature curing silicone elastomer. Cross linking takes place in the presence of moisture in the air to form a flexible resilient silicone rubber.,The material does not evolve any corrosive volatiles, e.g. acetic acid, amines, during cure and is ...