RS PRO Nitrile Rubber O-Ring, 9.6mm Bore , 14.4mm O.D , -30 → +120°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Nitrile Rubber Metric O-Rings

RS Pro metric O-Rings made from Nitrile, the most widely used elastomer in the seal industry. These O-Rings have an excellent resistance to petroleum products and work well in either low or high temperatures. Nitrile is highly resistant to abrasion and is an ideal choice in most industries.

Features and Benefits

• Nitrile rubber material
• Hardness 70 shore A
• Continuous operating temperature -40°C to 110°C, short term to 135°C
• Resistant to mineral hydraulic oils and greases
• Tolerance BS4518

Caution

NBR is not suitable with Esters, Ozone, Retones, Aldehydes,Chlorinated and Nitro Carbons

'O' Rings

'O' ring seals available in a choice of three materials to suit different applications. All 'O' rings are supplied in bags of 50.,The Nitrile 'O' rings are available in both Metric and Imperial sizes. Imperial sizes are to BS1806, Metric sizes are to BS4518.

Specificaties
Kenmerk Waarde
Inside Diameter 9.6mm
Outside Diameter 14.4mm
Thickness 2.4mm
Type O-Ring Seal
Material Nitrile Rubber
Minimum Operating Temperature -30°C
Maximum Operating Temperature +120°C
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
67 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 50
3,86
(excl. BTW)
4,67
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 4
€ 3,86
€ 0,077
5 - 9
€ 3,70
€ 0,074
10 - 24
€ 3,62
€ 0,072
25 +
€ 3,54
€ 0,071
*prijsindicatie
Related Products
RS Pro metric O-Rings made from Nitrile, the ...
Description:
RS Pro metric O-Rings made from Nitrile, the most widely used elastomer in the seal industry. These O-Rings have an excellent resistance to petroleum products and work well in either low or high temperatures. Nitrile is highly resistant to abrasion ...
'O' ring seals available in a choice of ...
Description:
'O' ring seals available in a choice of three materials to suit different applications. All 'O' rings are supplied in bags of 50.,The Nitrile 'O' rings are available in both Metric and Imperial sizes. Imperial sizes are to BS1806, Metric ...
ORJ O-rings to be placed on the first ...
Description:
ORJ O-rings to be placed on the first groove at the end of corrugated conduit in order to obtain a degree of protection of up to IP68 between the conduit and the connector. NBR 70 ElastomerTemperature range -30°C to +100°C. ...
RS Pro metric O-Rings made from Nitrile, the ...
Description:
RS Pro metric O-Rings made from Nitrile, the most widely used elastomer in the seal industry. These O-Rings have an excellent resistance to petroleum products and work well in either low or high temperatures. Nitrile is highly resistant to abrasion ...