RS PRO Nitrile Rubber Seal, 40mm Bore , 53 → 58mm O.D , -40 → +100°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

'V'-Ring Seals

The RS Pro V-Ring is an all-rubber seal designed for rotary shafts. Mounting directly onto the shaft, the elastic body holds itself firmly on the rotating shaft while the lip seals axially against the counter face, bearing race, bore housing or similar surfaces.

Features and Benefits

• Made from solid nitrile rubber • Can be stretched without requiring unit disassembly
• Accommodates considerable axial misalignment
• Seals effectively on oval shafts
• Wide tolerance of shaft sizes

Product Application Information

Typical applications include small electric motors and conveyor rollers. The V-Rings can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.

//media.rs-online.com/t_line/L749575-01.gif
//media.rs-online.com/t_line/LD749575-01.gif
//media.rs-online.com/t_line/LE749575-01.gif
//media.rs-online.com/t_line/LF749575-99.gif
//media.rs-online.com/t_line/LI749575-01.gif
Specificaties
Kenmerk Waarde
Inside Diameter 40mm
Outside Diameter 53 → 58mm
Thickness 9mm
Type V-Ring Seal
Material Nitrile Rubber
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
180 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
184 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 4)
1,613
(excl. BTW)
1,952
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 16
€ 1,613
€ 6,452
20 - 36
€ 1,548
€ 6,192
40 - 96
€ 1,515
€ 6,06
100 +
€ 1,48
€ 5,92
*prijsindicatie
Related Products
Replacement Nitrile® O-Ring cord for fast, on the ...
Description:
Replacement Nitrile® O-Ring cord for fast, on the spot production of O-Rings. Available in diameters between 1.6mm and 8.4mm.Nitrile is suitable for use within applications running at a maximum continuous temperature of 120°C (or up to 150°C intermittently). Use below ...
These seals comprise a metal annulus to which ...
Description:
These seals comprise a metal annulus to which a medium nitrile elastomeric ring of trapezoidal cross-section is bonded. They provide high and low pressure sealing for ports on fluid systems where mineral based hydraulic fluids or mineral based engine lubricating ...
ORJ O-rings to be placed on the first ...
Description:
ORJ O-rings to be placed on the first groove at the end of corrugated conduit in order to obtain a degree of protection of up to IP68 between the conduit and the connector. NBR 70 ElastomerTemperature range -30°C to +100°C. ...
Also known as oil seals, these seals are ...
Description:
Also known as oil seals, these seals are ideal for excluding dirt, dust, water or any other contaminant whilst retaining lubricant in rotary shaft equipment. They are generally used as a means of protecting the bearings of rotating shafts. Replaceable ...