Microchip ATPOWERDEBUGGER for use with Debugging & Programming ARM Cortex-M

  • RS-stocknr. 134-5581
  • Fabrikantnummer ATPOWERDEBUGGER
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Power Debugger

The Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers. The tool is using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces. It is using JTAG or SWD target interfaces for the ARM Cortex-M based SAM microcontrollers.Extra features of the Power Debugger are two independent current sensing channels for measuring and optimising the power consumption.A CDC virtual COM port and Data Gateway channels are included for streaming data to the host computer from a SPI, USART, TWI or GPIO source.The Power Debugger is a CMSIS-DAP compatible debugger that streams power measurements and application debugging data to Data Visualiser for real-time analysis.

Supports UPDI, JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfacesVoltage and Current simultaneous measurements on two independent channelsUSB feed-through connection for easy measurement of current consumption of USB powered target boardUSB poweredAdjustable 1.62 V to 5.5 V power supply operationARM Cortex Debug Connector (10-pin) pin-outAVR JTAG connector pin-outCDC virtual COM port interface

Power Debugger Kit Contents

Main unit with plastic back plateUSB cables (2)Squid cable 10-leadFlat cable (10-pin 50 mil connector and 6-pin 100 mil connector)Adapter board (20-pin 100 mil connector, 6-pin 50 mil connector and 10-pin 100 mil connector)Jumper cable 20-pin 100 mil

Generic Development Tools

Specificaties
Kenmerk Waarde
For Use With Debugging & Programming ARM Cortex-M
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
144,42
(excl. BTW)
174,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 144,42