Microchip ATSAMA5D2C-XULT for use with 3.3v Uno R2 & R3, Arduino DUE, Mega R3 Shield

  • RS-stocknr. 168-2661
  • Fabrikantnummer ATSAMA5D2C-XULT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The SAMA5D2 Xplained Ultra is a fast prototyping and evaluation platform for the SAMA5D2 series of microprocessors (MPUs). The board includes eMMC and DDR3 memories as well as a rich set of connectivity options. Connectors and expansion headers allows for easy customization and quick access to leading edge embedded features such as the Class D amplifier or the capacitive touch controller (PTC). A Linux distribution and software package allows you to easily get started with your development.

Based on the ATSAMA5D27C-CU
x2 DDR3L 2Gb (16-bit data access)
x1 eMMC 4GB
x1 Serial data QSPI Flash
x1 Serial EEPROM + Ethernet Mac address
x1 Ethernet 10/100 Port featuring the KSZ8081 Ethernet PHY
x2 USB Ports
x1 HSIC (Consider using with EVB-LAN7850 for HSIC to Gigabit Ethernet)
Arduino DUE, 3.3v Uno R2 & R3, and Mega R3 shield compatible
6-layer PCB

Specificaties
Kenmerk Waarde
For Use With Arduino DUE, Mega R3 Shield, 3.3v Uno R2 & R3
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
143,91
(excl. BTW)
174,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 143,91
Related Products
The IES-SHIELD-UART, from Intelligent Embedded Solutions, is an ...
Description:
The IES-SHIELD-UART, from Intelligent Embedded Solutions, is an Arduino Uno Shield for large TFT integration. The Arduino is a popular open-source electronics prototyping platform used by designers, hobbyists and artists. It is easy-to-use hardware and software which uses flexible design ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. STEPPER click features a microstepping stepper motor driver with a built-in translator. A3967SLBT stepper motor driver chipDrives bipolar step motors in full-, half-, quarter- and eighth-step ...
This 18-channel R/C servomotor driver shield is designed ...
Description:
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format ...
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation ...
Description:
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on the CR95HF 13.56MHz multi-protocol contactless transceiver IC. • CR95HF-VMD5T contactless NFC/RFID Reader/Writer • 47 x 34mm, four-turn PCB antenna loop • Antenna tuning circuit • Operating Frequency: 13.56MHz • ...