Idec Mounting Bracket for use with SA1E

  • RS-stocknr. 179-5343
  • Fabrikantnummer SA9Z-K01
  • Fabrikant Idec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Two mounting screws (M3 ´ 12 mm sems screws) are supplied
The through-beam model requires two mounting brackets, one each for the projector and the receiver.

Specificaties
Kenmerk Waarde
Accessory Type Vertical Mounting Bracket
For Use With SA1E
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
2,69
(excl. BTW)
3,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 2,69
25 - 49
€ 2,48
50 +
€ 2,38
Related Products
The MSL 2 and 3 beam devices are ...
Description:
The MSL 2 and 3 beam devices are used for perimeter and access guarding where the hazard is considered high risk requiring a safety device according to EN954 Category 4. The MSL system is available in two formats, separate sender ...
The L41 is a type 4 (IEC61496) cascadable ...
Description:
The L41 is a type 4 (IEC61496) cascadable single-beam photoelectric safety switch comprising of a sender and a receiver. The correct function of the L41 can be checked with the aid of the test input on the sender. Integrated testing ...
Used for applications where electrodes need to be ...
Description:
Used for applications where electrodes need to be spaced apart (to avoid clogging)Screw-in electrode connection and through hole fixing via two M5 screws (supplied).
Single-pole electrode holders are useful where electrodes require ...
Description:
Single-pole electrode holders are useful where electrodes require spacing apart to avoid clogging. The unit may be screwed in place (M18 thread) and is capable of holding the electrode using the two M4 screws. Suitable for use up to 29kg/cm2 ...