Schneider Electric M12 4-Pin, RJ45 10m Cable & Connector for use with IP67 Switch

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Telemecanique Sensors OsiSense XG

RFID - Radio-frequency Identification - can replace traditional bar-coding and electro-magnet tags as a method of product tracking. The OsiSense XG system operates at 13.65Mhz, and uses tag readers that are compatible with almost all tags conforming to ISO 18000-3, ISO 15693, and ISO 14443. This makes it ideal for a wide range of applications that involve tracking the movement of people or products.

Features and Benefits

Tag readers feature integral antennas
Robust IP65 sealed tag readers
Sensing distance up to 100mm
Read/write compatibility with the majority of 13.56 MHz tags on the market
Unlimited read cycles
2.5 Million write cycles typical life
Industry standard M12 connectors for cabling

Note

Maximum reading distance is dependant on tag type selected.

Approvals

UL, CE, EN 301489-1, EN 301489-3

Telemecanique Ositrack

Specificaties
Kenmerk Waarde
Connection Type M12 4-Pin, RJ45
Cable Length 10m
Accessory Type Cable & Connector
Connection Gender Male
For Use With IP67 Switch
Orientation Straight
33 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
62,32
(excl. BTW)
75,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 62,32
5 - 9
€ 60,42
10 +
€ 58,48
Related Products
A range of OsiSense XU photo-electric sensors from ...
Description:
A range of OsiSense XU photo-electric sensors from Telemechanique. Four modes of detection in one unit Easy set-up at the touch of a button Self teach precise set-up 'multi-mode detection' Sensing distance dependent on mode of operation Through Beam Functionality ...
Four modes of detection in one unitEasy set-up ...
Description:
Four modes of detection in one unitEasy set-up at the touch of a buttonSelf teach precise set-up 'multi-mode detection'Sensing distance dependent on mode of operationThrough Beam Functionality using additional light source (thru-beam accessory)Programmable NO/NC switchingConnection: pre-cabled or plug-in connector ...
The OsiSense XU general purpose photo-electric sensor from ...
Description:
The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9). ...
The OsiSense XU general purpose photo-electric sensor from ...
Description:
The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9). ...