Sick M23 12-Pin Female Connector for use with DFS60, DRS61 Series

  • RS-stocknr. 492-9214
  • Fabrikantnummer DOS-2312-G
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Loose Mating Connector for DRS61 Encoders

SICK STEGMANN Programmable Incremental Encoders

The DRS61 programmable incremental encoder may be programmed to produce any PPR from 1 to 8192. The programming tool is quick and easy to use. Consisting of a USB lead and Windows 98/2000/XP compatible software, you can programme the encoder in seconds. For those users utilising the zero/marker pulse the DRS61 offers a further benefit. At the push of a button the zero/marker pulse can be aligned precisely with the mechanical zero of your machine.

Freely programmable PPR from 1 to 8192
Solid shaft or hollow shaft design
Electronic adjustment of zero/marker pulse
Sealed to IP65 (with mating connector fitted)
Interchangeable with most competitor products
Temperature range: -20 to +85°C

Note

Software and leads available separately

Specificaties
Kenmerk Waarde
Connection Type M23 12-Pin
Accessory Type Connector
Connection Gender Female
For Use With DFS60, DRS61 Series
39 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
93 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
16,60
(excl. BTW)
20,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,60
5 - 9
€ 16,09
10 +
€ 15,55
Related Products
For demanding environments (e.g. machine tool equipment), E2FM ...
Description:
For demanding environments (e.g. machine tool equipment), E2FM Stainless Steel sensors are the perfect choice. Their tough all stainless steel housing and sensing face is highly resistant to impact, abrasion and aggressive chemicals and oils. One piece Stainless Steel housingSensing ...
These Gecko series 1.25mm pitch wire to board ...
Description:
These Gecko series 1.25mm pitch wire to board crimp socket housings have a dense 1.25mm pin spacing and a low profile miniature design offering both high performance, reliability and PCB space saving. The housings of these Gecko crimp sockets feature ...
Hollow shaft rotary encoders are especially suitable for ...
Description:
Hollow shaft rotary encoders are especially suitable for direct mounting on the drive shaft (12 mm)Minimal effort required for mountingTemperature and ageing compensationShort-circuit proof outputsPolarity protection for operating voltage inputFlange socket; order mating connector separately.
Preset counter / tachometer PAXI with voltage supply ...
Description:
Preset counter / tachometer PAXI with voltage supply 85 → 250 VAC and sensor supply for the rotary transducerCut-off option: relay output card with 2 changeoversSpring arm for customised mounting and direction, adjustable pre-tension force: 20, 25 and 30 N ...