Turck Test Box Programming Tool for use with TB4 Sensor

  • RS-stocknr. 175-9851
  • Fabrikantnummer TB4
  • Fabrikant Turck
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Binary and analog sensors can be tested and configured without major effort with the TB4.The sensors can be adjusted on machines and in installations without connection to the operating voltage. The switching status of the sensor outputs is clearly visible on the illuminated display. The connector is set to different voltage or current output values via pushbutton. The analog out-put of the sensor can also be displayed as abargraph with the test box. The test box enables teachable sensors to beconfigured via pushbutton (jumper betweenPin5 and Pin3).ON/OFF switching of test box via menu but-ton, press approx. 3 sec.

Universal test device for different sensor types.
Analog sensors current/voltage
3-wire DC sensors (npn/pnp)
Function test without dismounting the sensor
User-friendly display and control elements
Powered via 2 batteries, type E-Block 9V or 24 VDC external supply
Analog test box
Test box for sensors with analog or switching output

Specificaties
Kenmerk Waarde
Type Test Box
For Use With TB4 Sensor
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
407,26
(excl. BTW)
492,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 407,26
Related Products
The Panduit CT-1000 crimp tool is a controlled ...
Description:
The Panduit CT-1000 crimp tool is a controlled cycle semiautomatic ferrule crimping tool. The CT-1000 has an innovative rapid load design that utilizes continuously moulded ferrules to significantly reduce installation time. The CT-1000 controlled cycle tool cuts, strips and crimps ...
A range of IDC terminating heads for use ...
Description:
A range of IDC terminating heads for use with the pistol grip handle (see stock number 120-4477). These IDC terminating heads are designed to terminate discrete wire in connections that contain insulation displacement contacts.
For the fast and secure seating of data ...
Description:
For the fast and secure seating of data wires into terminalsSuitable for a wide range of terminal block typesOne step action for automatic seating & trimming of excess wiresHandle includes wire extractor hook & spudgerTotal length: 180 mm.
A range of TE Connectivity LSA-Plus and LSA-Profil ...
Description:
A range of TE Connectivity LSA-Plus and LSA-Profil Connection and Disconnection Modules.The Insertion and Extraction Tool, stock number 813-5814 , is fitted with a sensor which trims excess cable when a termination has been completed. The conductor diameter range of ...