FTDI Chip, 10 cm White with LED USB to RS232 Cable, US232R-10

  • RS-stocknr. 429-274
  • Fabrikantnummer US232R-10
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

USB to RS-232 Evaluation Cables, FTDI Chip

This range of USB to RS-232 cables enables you to test the functionality of our FT232R chip before integrating it into your design. The cables are available in several lengths – 10 cm, 1 m and 5 m lengths and all with a standard DB9 connector. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Applications

USB to RS232 Converter Upgrading legacy peripherals to USB
USB Industrial Control
USB barcode Readers
USB Software/Hardware Encryption Dongles

More about the US232R-10 …

The FTDI US232R-10 is a premium USB to RS232 converter cable. It can also be used to evaluate the FT232R chip and drivers.
In comparison to more basic models, the US232R-10 features a white gloss finish. It also has blue LED lit sides to indicate TX and RX traffic. The connectors on the US232R-10 are also gold plated, for a high quality and durability.

What communication rates can it achieve?
The US232R-10 can deliver communication rates from 300Baud to 1MBaud.

Approvals
The US232R-10 is CE and FCC approved.

112 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
19,56
(excl. BTW)
23,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 19,56
10 - 19
€ 16,87
20 - 49
€ 16,41
50 - 99
€ 16,00
100 +
€ 15,60
Related Products
The EVAL232R is a USB to RS232 development ...
Description:
The EVAL232R is a USB to RS232 development and evaluation module for the FT232RL IC device. Additional header pins on the board which provide access to the FT232RL device's configurable CBUS interface pins. Powered from USB, the EVAL232R supports both ...
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The VDrive2 module provides an easy solution for ...
Description:
The VDrive2 module provides an easy solution for adding a USB Flash disk interface to an existing product. Only four signal lines plus 5V supply and ground are required to be connected. One USB "A" socket to connect to a ...
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. (687-7730) USB-COM232-Plus1 - USB to RS232 Adapter(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter(687-7742) USB-COM232-Plus4 - USB to ...