Combimet 19in rack case,2U,88x483x365

  • RS-stocknr. 769-4876
  • Fabrikantnummer M6219269
  • Fabrikant METCASE
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Combimet 19in. Rack Case

The Combimet is a universal 19in. rack case with anodised aluminium front panels and two ergonomic front panel handles. The aluminium case body consists of two side panels with removable top, base and rear panels. The base panel of this 19in. rack case has mounting holes for a PCB or a chassis plate. All parts of the enclosure are fitted with M4 earth studs for electrical continuity.

Modern design incorporating ergonomic front panel handles
Robust aluminium case body with removable top, base and rear panels
Ventilated top and base
Anodised aluminium 19in. front panels
Black RAL 9005
Mounting holes in base for PCBs & chassis
M4 earth studs on all components for electrical continuity
Enclosure supplied fully assembled

Standards

Conforms to DIN 41494 & IEC 297-1.

Specificaties
Kenmerk Waarde
Rack Units 2U
External Height 84.6 mm
External Width 482.6 mm
External Depth 365mm
External Dimensions 88.05 x 482.6 x 365mm
Series Combimet
Colour Black
External Case Material Aluminium
6 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
Was € 139,16
124,62
(excl. BTW)
150,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 124,62
Related Products
Die cast aluminium front and rear frames linked ...
Description:
Die cast aluminium front and rear frames linked by heavy gauge side extrusions incorporating carrying handles to IEC297Removable, 0.9mm zintec steel, top and bottom coversTwo-tone grey epoxy powder paint finish with paint free areas for earth connectionsFour antistatic feet, two ...
Accommodates PCBs (horizontally) or non-standard components on a ...
Description:
Accommodates PCBs (horizontally) or non-standard components on a chassisExtruded aluminium constructionSlotted side panels to fix chassis plates at variable heights and depthsHF-shielding can be fittedProtection IP20 to IEC/EN 60529 (with closed covers)Side panels: extruded aluminium natural finish, Front panel: ...
Lightweight case with aluminium body 509mm wide x ...
Description:
Lightweight case with aluminium body 509mm wide x 485mm deepFront and rear doors, anodised aluminium alloy (neoprene colour)Ideal for portable equipmentRecessed strap handle (3U), recessed swing ball handles (6U)Hard wearing, glare-free, scratch and abrasion resistant neoprene coatingAnodised aluminium lid-to-body ...
1.5 mm-thick steel sheet wall-mounted distribution units with ...
Description:
1.5 mm-thick steel sheet wall-mounted distribution units with a 482.6 mm (19") mounting bezel whose depth may be continuously adjusted, mounted on C rails.These units are ideal for small networks or to serve as a stage splitter.Logical and orderly input ...