15U Server Rack With Steel 2-Post Frame in Black

  • RS-stocknr. 186-3310
  • Fabrikantnummer RK15WALLOA
  • Fabrikant Startech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RK15WALLOA Wall Mount Rack for Network Switch

This open frame wallmount server rack provides 15U of storage, helping you to save space and stay organized. The equipment rack features an adjustable depth and can hold a total of up to 198 lb (90 kg).

Accommodate Larger Devices

The open frame rack adjusts from 12 to 20 inches (30.4 to 50.8 cm) to accommodate larger data, network, and telecommunication devices. The above-average depth also gives you the option to mount shelves and other accessories.

Free up Floor Space

When space is limited you can wall-mount the open-frame rack in a server room, office, or above a doorway, to expand your workspace and ensure your equipment is easy to access.

Keep Equipment Cool and Accessible

The rack’s open frame design promotes passive cooling ensures easy access to your rack-mounted equipment and makes it simple to configure mounted devices, which saves you time.

Easy, Hassle-Free Installation

With an adjustable depth as low as 12 inches (30.4 cm), this network rack is perfect for smaller spaces. It’s easy to assemble and features wall-mounting holes that are spaced 12 and 16 in. apart, making it suitable for mounting on almost any wall, based on North American wall-frame stud-spacing standards.

Features & Benefits

• Accommodate a range of device sizes with the adjustable depth and a weight capacity of 198 lbs. (90kg)
• Fits into smaller spaces and frees up floor space when mounted to the wall
• Provides passive cooling for equipment with the open frame wall mount rack design
• Easy installation with the standard 12 and 16 inch mounting holes accommodating standard stud spacing

Applications

• Small office spaces
• When floor space is limited

What’s in the package?

• Vertical Rails
• Front Horizontal Brackets
• Rear Horizontal Brackets
• M6 Cage Nuts
• M6 Screws
• Plastic Washers
• Assembly Screws
• Flat Washers
• Bolts
• User Manual

FAQs

What is a “U” or rack unit measure?
A rack unit, commonly abbreviated as “U” or sometimes as “RU” is a standard unit of measure that is applied to rack mount equipment. One “U” is 1.75 inches (44.45mm).; the standard rack, at 19 inches, is a typical full-size rack at 42U, meaning it holds just over 180 cm of equipment. A typical half-height rack is 18-22U.

Rack servers and other rack mountable hardware equipment are designed in multiples of 1.75 inches and specified in multiples of rack units; One rack unit is “1U”, 2 rack units as “2U” and so on. Racks are built to hold equipment of those sizes.

Specificaties
Kenmerk Waarde
Frame Type 2-Post
Rack Units 15U
Material Steel
Colour Black
Overall Height 773mm
Weight 15.2kg
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
293,32
(excl. BTW)
354,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 293,32
Related Products
The Tektronix TTR500 Series 2-port, 2-path vector network ...
Description:
The Tektronix TTR500 Series 2-port, 2-path vector network analyzers with a choice of two models: 3GHz (RS 133-9912) or 6GHz (RS 136-9913) respectively. Frequency Range: 100 kHz to 3GHz or 6GHzDynamic Range: Greater than 122 dBTrace Noise: Less than 0.008 ...
For the targeted dissipation of heat to assembliesAir ...
Description:
For the targeted dissipation of heat to assembliesAir flow rate of up to 162 m3/h (with 3 fans) and 192 m3/h (with 6 fans)Protection against contact in accordance with EN 292, T1 and T2Mechanical retainer for power cableCan be adapted ...
Additional 19in. Angles required for rear panels (2 ...
Description:
Additional 19in. Angles required for rear panels (2 per pack)Slide rails support heavy slide-in equipment (2 per pack)Tapped strips enable slide rail & internal mounting in several positions (8 per pack).
Removable top cover6, 7, 9U cases have a ...
Description:
Removable top cover6, 7, 9U cases have a different side panel construction to accommodate heavier equipmentShell handles can be replaced by folding handles, 50kg capacity (6, 7, 9U only)Folding feet can be fitted instead of standard anti-skid feet anthracite grey ...