- RS-stocknr.:
- 186-4144
- Fabrikantnummer:
- MSP-25-ST
- Fabrikant:
- Ruland
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-06-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 90,70
(excl. BTW)
€ 109,75
(incl. BTW)
Aantal stuks | Per stuk |
1 - 5 | € 90,70 |
6 - 9 | € 87,16 |
10 - 24 | € 85,35 |
25 + | € 83,53 |
- RS-stocknr.:
- 186-4144
- Fabrikantnummer:
- MSP-25-ST
- Fabrikant:
- Ruland
Datasheets
Wetgeving en compliance
Productomschrijving
Ruland MSP-25-ST is a two-piece shaft collar with a 25mm bore, 45mm OD, and 15mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. MSP-25-ST is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MSP-25-ST is stamped with the Ruland name and bore size for ease of identification. Halves are mated throughout the manufacturing process for proper fit and alignment. MSP-25-ST is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 316 stainless steel with hardware of like material for consistent corrosion resistance. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling. It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
Specificaties
Kenmerk | Waarde |
---|---|
Shaft Diameter | 25mm |
One/Two Piece | Two Piece |
Outside Diameter | 45mm |
Fastening | Clamp Screw |
Width | 15mm |