4D Systems LCD Display Adapter Board for Arduino, 4D-Arduino-Adaptor-Shield-II

  • RS-stocknr. 841-7807
  • Fabrikantnummer 4D-Arduino-Adaptor-Shield-II
  • Fabrikant 4D Systems
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

4D Arduino Adapter Shield II

The Arduino Adapter Shield II, from 4D Systems, is a shield interface designed to attach their display modules to the Arduino platform. The Arduino Adapter Shield II eliminates the need to use jumper wires on the Arduino headers.
The Arduino Adapter Shield II is included within some of 4D Systems' Arduino Module Packs.

Compatible 4D Systems display modules:
uOLED-xx-G1/G2 modules
uLCD-xx-G1/G2 modules
uLCD-xx-PT modules
uLCD-43 (all versions)
uLCD-xx-PTU modules
uVGA-II/III modules
uLCD-35DT
uLCD-70DT
Future models

4D Arduino Adapter Shield kit contains:
4D Arduino Adapter Shield
150mm 5-way female-female jumper cable
5-way male-male adaptor

4D Systems Display Accessories

Specificaties
Kenmerk Waarde
Product Name 4D Adaptor Shield II
Kit Classification Adapter Board
Processor Part Number 4D-Arduino-Adaptor-Shield-II
For Use With Arduino
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
25 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,38
(excl. BTW)
13,77
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 11,38
10 +
€ 11,15
Related Products
The 4D Systems Gen4 display module starter kit ...
Description:
The 4D Systems Gen4 display module starter kit is a 7in integrated colour TFT LCD with resistive touch powered by the well-known 4D systems Diablo16 graphics processor, which offers an array of functionality and options for designer users. The operating ...
Two eRIC Arduino Shields which allow wireless communication ...
Description:
Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board ...
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
The MKRFox1200 is shipped with a GSM antenna ...
Description:
The MKRFox1200 is shipped with a GSM antenna that can be connected to the board with the micro UFL connector. If you want to change the antenna please check that it can accept frequencies in the SigFox's range (868 Mhz). ...