Jumo ecoTRANS, Analogue, Conductivity, Temperature Signal Conditioner, Temperature

  • RS-stocknr. 185-435
  • Fabrikantnummer 202731/01-015/024,000
  • Fabrikant Jumo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

ecoTRANS Lf01 - conductivity transducer

Transducer for conductive conductivity measuring cells
For applications in general water technology
2 analogue inputs
1 analogue, freely programmable, actual value output
3-way isolation
LED status display

Supplied with

Supplied with ecoTRANS Lf 01 / 02 PC setup software

Specificaties
Kenmerk Waarde
Input Type Temperature
Output Type Analogue
Signal Conditioner Type Analogue, Conductivity, Temperature
Output Range 0 → 10 V, 0 → 20 mA
Supply Voltage 24 V dc
Mounting Type DIN Rail
Sensor Compatibility Conductivity Cell, PT100 Sensor, PT1000
Minimum Operating Temperature -25°C
Maximum Operating Temperature +250°C
Series ecoTRANS
Operating Temperature Range -25 → +250 °C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
328,60
(excl. BTW)
397,61
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 328,60
Related Products
Single channel signal processors for use with insertion ...
Description:
Single channel signal processors for use with insertion flow sensors that do not have internal control logic options available with digital or analogue output. Finger protectionLED indication of flow conditionsSimple switch point set up using potentiometers500Ω load (max.)PNP Output8-pole, 18mm ...
Galvanic isolation output to supplyPt100 2 or 3-wire ...
Description:
Galvanic isolation output to supplyPt100 2 or 3-wire operationSelectable input sensor temperature range: -50 to +100°C or -50 to +300°COutput selectable via terminals: 0 to 10V, 0 to 20mA or 4 to 20mAOffset and gain adjustable via front panel, ±5% ...
Two threshold relay outputs (2 C/O contacts), upper ...
Description:
Two threshold relay outputs (2 C/O contacts), upper and lower threshold adjustableOpen or closed circuit system adjustable by DIP switchesThresholds and hysteresis adjustable by front side potentiometersTwo yellow LED's show the state of the output relaysGreen LED indicates supply voltage ...
All units suitable for use within ambient temperature ...
Description:
All units suitable for use within ambient temperature range from : -20 to +60°C. Module dimensions: H105 x W22.5 x D129.5mm. Differential temperature measurementConfigurable output signal in case of input signal interrupts3-way isolationShort-circuit proof outputsAdjustable temperature range.