Phoenix Contact MACX MCR-EX-SL-NAM-HO, Isolation Amplifier Galvanic Isolator, DC Voltage ATEX, IECEx,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

MACX MCR-EX-SL Series Signal Conditioners

The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design.

Ex-i signal conditioner for many applications
Electrical 3-way isolation
Screw or spring-cage connections are available
IP20 protection
Width only 12.5 mm

Approvals

CE

Specificaties
Kenmerk Waarde
Input Type DC Voltage
Output Type Current, Voltage
Signal Conditioner Type Isolation Amplifier
Input Range 9.6 → 30 V dc
Output Range Maximum of 10 mA, Maximum of 9.6 V
Supply Voltage 9.6 → 30 V dc
Mounting Type DIN Rail
Sensor Compatibility NAMUR Sensor
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Operating Temperature Range -20 → +60 °C
Number of Channels 1
Termination Screw
Hazardous Area Certification ATEX, IECEx
Special Features Installation in Zone 2 Permitted, 3 Way Electrical Isolation
Series MACX MCR-EX-SL-NAM-HO
Module Type Amplifier
Standards Met EN 60079-11, EN 61000-6-2, EN 61000-6-4, EN 61010-1, EN 61326, IEC 61508 to SIL 3, UL 61010
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21-11-2019, met een levertijd van 1 werkdag.
Prijs Each
Was € 152,75
117,75
(excl. BTW)
142,48
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 117,75
Related Products
DIP switches allow reconfiguration of inputs & outputs ...
Description:
DIP switches allow reconfiguration of inputs & outputs of the isolation amplifier, enabling over 160 amplification settingsTwo potentiometers accessible from front adjustment of zero point (zeroing) & amplification (span) for gauge calibration.
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
These isolators can be mounted on DIN rail ...
Description:
These isolators can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. No separate supply voltage necessary. Single and dual channel ...
Can can be mounted on DIN rail individually ...
Description:
Can can be mounted on DIN rail individually or with other units. The housing is 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products.,Required a 24Vdc supply, either directly to module terminals or via ...