Phoenix Contact MINI MCR-2-UNI-UI-2UI, Signal Duplicator Signal Conditioner, Current, Voltage ATEX,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

MINI MCR - Signal Duplicators

The 2905026 from Phoenix Contact is a 4-way, configurable signal duplicator. This module can process inputs from 0mA – 24mA and an input voltage of 0V – 12V, while outputting 0mA – 21mA and an output voltage of 0V – 10.5V. The 2905026 has plug-in technology to allow for an easier setup and is approved with an ATEX zone-2 installation rating.

The module can be configured with either the easy to access DIP switch on the side, or can be programmed via an S-PORT using FDT/DTM.

Features and benefits:

  • Freely adjustable inputs and outputs

  • ATEX Zone-2 installation approval (nA)

  • Reinforced isolation in alignment with IEC 61010-1

  • Supply voltage range 9.6 V DC up to 30 V DC

  • Power from a TBUS Din rail connector

Applications:

  • Electrical isolation

  • Conversion

  • Amplification

  • Filtering of standard signal

Accessories:

TBUS Din rail connector – 489-2825
USB Programmer (S-PORT) – 801-6107

Specificaties
Kenmerk Waarde
Input Range 0 → 12 V, 0 → 24 mA
Output Range 0 → 10.5 V, 0 → 21 mA
Supply Voltage 24 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Hazardous Area Certification ATEX
Standards Met CUL, CULus, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-4, IEC 61010-1, UL
Series MINI MCR-2-UNI-UI-2UI
Number of Channels 1
Termination Screw
Operating Temperature Range -40 → +70 °C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
213,31
(excl. BTW)
258,11
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 213,31
Related Products
MINI MCR series passive isolators with 2 channels, ...
Description:
MINI MCR series passive isolators with 2 channels, for the electrical isolation of current signals without auxiliary power. Spring-cage connectionAuxiliary voltage not requiredSupplied by an input loopHighly-compact 2-wire passive isolators for electrical isolation and filtering of standard analog signals.
For Pt100 or thermocouplesMeasurement range and output signal ...
Description:
For Pt100 or thermocouplesMeasurement range and output signal configurable3-way isolationDiagnostic LED for analysing faultsPower supply via feed terminal and mounting rail bus connector (stock no. 489-2825) possibleScrew or spring-loaded connectorOverall width 6.2 mm.
MINI MCR series limit value switches, with adjustable ...
Description:
MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection. Power supply possible via the foot element (T-connector)Status and error indication via two diagnostic LEDsPDT relay at output3-way isolationLimit value can be freely adjusted via ...
MTL1142 is a 1 channel analogue input isolator ...
Description:
MTL1142 is a 1 channel analogue input isolator with current source or current sink output. It provides HART communication for Smart two wire transmitters. The signal conditioner is DIN Rail mountable. 1 Channel, smart for 2/4 wire transmittersTransmitters can be ...