Phoenix Contact MINI MCR-2-T-REL-PT, Limit Value Switch Signal Conditioner, RTD, Thermocouple ATEX,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

MINI MCR - Limit Value Switches

MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection.

Power supply possible via the foot element (T-connector)
Status and error indication via two diagnostic LEDs
PDT relay at output
3-way isolation
Limit value can be freely adjusted via potentioemeter on the front
Highly-compact threshold value switch for switching analog limit values

Specificaties
Kenmerk Waarde
Input Type RTD, Thermocouple
Output Type Relay
Signal Conditioner Type Limit Value Switch
Input Range 0 → 4000 Ω
Output Range 100 mA → 6 A, 240 (UL) V dc, 250 V ac
Supply Voltage 24 V dc
Mounting Type DIN Rail
Sensor Compatibility A-1, A-2, A-3, B, Cu, E, J, K, L, M, N, Ni, Pt, R, S, T, U
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Number of Channels 1
Hazardous Area Certification ATEX
Special Features Supports NFC Communication
Series MINI MCR-2-T-REL-PT
Standards Met CE Compliant, EN 61000-6-4, GL, IEC 61010-1, UL 508
Operating Temperature Range -40 → +70 °C
Termination Push-In
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was € 196,56
149,87
(excl. BTW)
181,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 149,87
Related Products
For Pt100 or thermocouplesMeasurement range and output signal ...
Description:
For Pt100 or thermocouplesMeasurement range and output signal configurable3-way isolationDiagnostic LED for analysing faultsPower supply via feed terminal and mounting rail bus connector (stock no. 489-2825) possibleScrew or spring-loaded connectorOverall width 6.2 mm.
Symmetric DIN rail mounting units with finger protected ...
Description:
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above ...
RS Pro isolating signal converters for converting a ...
Description:
RS Pro isolating signal converters for converting a range of process signals into standard active and passive transmission current or voltage signals. AC supply voltageFully isolated – Input/Supply/OutputSignals conditioned before being fed through opto-isolating circuitRed LED power ON indicator.
GEN1600T/Signal Conditioner for RTD, Thermocouple and Potentiometer sensors. ...
Description:
GEN1600T/Signal Conditioner for RTD, Thermocouple and Potentiometer sensors. Other sensor characteristics can be downloaded into the product for your special needs from USB Speed-Link 3.4.1.0 http://www.status.co.uk/software.html Output stage offers voltage, bipolar voltage or current re-transmission ...