Phoenix Contact MCR-C-UI-UI-DCI-NC, Isolation Galvanic Isolator, Voltage 0 → 10 V Input, 0 → 10 V Output

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Configurable 3-way Isolation Amplifier

From Phoneix Contacts, the DIN-Rail mounted MCR-C-UI-UI-DCI 3-Way isolation amplifier is for universal use as the input and output signal ranges can be individually configured. The conversion and electrical isolation of the analogue signals are effected by an inductive transmission procedure. A filter that is connected in series downstream of the transformer reduces interference.

Programming

The MCR-C-UI-UI-DCI signal conditioners are configurable via DIP switches accessed via opening the housing and sliding out the PCB. The setting of the required input range and output range is configured by separate DIP switches, with adjustments made via ZERO and SPAN potentiometers of the housing front panel.

Features and Benefits

• DIN Rail Mounting
• Over 160 amplification settings, set via input and output DIP switches
• Integrated surge protection with transient discharge to the DIN rail
• Transient protection

Specificaties
Kenmerk Waarde
Input Range 0 → 10 V
Output Range 0 → 10 V
Supply Voltage 18 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 → +65 °C
Series MCR-C-UI-UI-DCI-NC
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02-10-2020, met een levertijd van 1 werkdag.
Prijs Each
330,69
(excl. BTW)
400,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 330,69
Related Products
The intrinsically safe interface blocks of the MACX ...
Description:
The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design. Ex-i signal conditioner for many applicationsElectrical 3-way isolationScrew or spring-cage connections are availableIP20 protectionWidth only 12.5 mm.
MINI MCR series passive isolators with 2 channels, ...
Description:
MINI MCR series passive isolators with 2 channels, for the electrical isolation of current signals without auxiliary power. Spring-cage connectionAuxiliary voltage not requiredSupplied by an input loopHighly-compact 2-wire passive isolators for electrical isolation and filtering of standard analog signals.
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
Voltage isolator that can be mounted on DIN ...
Description:
Voltage isolator that can be mounted on DIN rail individually or with other systems. The housings are 102.5mm high by 6.2mm. The performance specifications are similar to standard sized MCR products. Input and output, 0-10V, +/- 10V.