Siemens Voltage to Current Signal Conditioner, Voltage 0 10 V Input, 0 20 mA Output

  • RS-stocknr. 418-4843
  • Fabrikantnummer 3RS1700-1CD00
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

3RS170X Active Interface Converter

Galvanic isolation of analogue signals
Surge suppressor on analogue input
2-way isolataion (output not isolated from supply)
Yellow LED for visual voltage warning

Specificaties
Kenmerk Waarde
Input Range 0 10 V
Output Range 0 20 mA
Supply Voltage 24 V ac/dc
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Operating Temperature Range -25 +60 °C
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
222,78
(excl. BTW)
269,56
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 222,78
Related Products
Wago 857 series JUMPFLEX threshold value switch for ...
Description:
Wago 857 series JUMPFLEX threshold value switch for monitoring analogue standard signals and reporting signals exceeding a preset threshold. PC configuration interface Digital switching output Changeover contact relay output Calibrated scale switching Threshold value configuration via DIP switches and teach-in ...
Switch selectable input signal rangesOutput selectable by terminalsOffset ...
Description:
Switch selectable input signal rangesOutput selectable by terminalsOffset and gain adjustable ±5%LED indication below 5% inputGalvanic isolation input to output to supplyNPN – PNP output device; 30Vdc max.
Controls input with an analogue signalZero-crossingAdjusts cables in ...
Description:
Controls input with an analogue signalZero-crossingAdjusts cables in pulse group mode with optimised dynamic cycle timeDual anti-parallel thyristorMOV protectionMaster / slave modeAttach to DIN rails.
Millenium 2 Plus has been designed to automate ...
Description:
Millenium 2 Plus has been designed to automate building and smaller machine applications. Many pre-programmed standard functions are available for counting, timing, comparison, multiplexing, time based programming, etc.,Non-expandable, expandable, and application specific starter kits are also available. All ...