Phoenix Contact MINI MCR-SL-1CP-I-I, Isolation Passive loop Isolator, Current 0 → 20 mA Input

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Passive 4-20mA Loop Isolator

The 2864655 from Phoenix Contact is a 2-channel, loop powered passive isolator. This module is designed to electrically isolate current signals without an auxiliary power. Phoenix's 2864655 doesn't require any additional auxiliary voltage and has a voltage drop of just 1.7V. Not to mention, this module has 2 channels and a very slim 6.2 mm width housing. It has an ATEX zone-2 (potentially explosive areas) installation approval and is easily mounted on a DIN rail.
The 2864655 can isolate and filter standard current signals from 0mA up to 20 mA.

Features and benefits:

  • 2 channels on a housing of only 6.2 mm

  • No need for any additional auxiliary voltage

  • Voltage drop at isolating amplifier of just 1.7 V

  • Supplied by an input loop

  • ATEX rating allowing for installation in zone 2 areas (potentially explosive areas)

  • Mounted on either TBUS connector or straight onto DIN rail

MINI MCR-SL-1CP-I-I Loop-powered isolator - 2864419

The 2864655 from Phoenix Contact is a single channel, loop-powered passive isolator. This module is designed to electrically isolate current signals without auxiliary power. Phoenix's 2864655 doesn't require any additional auxiliary voltage and has a voltage drop of just 1.7V. Not to mention, this module has 2 channels and a very slim 6.2 mm width housing. It has an ATEX zone-2 (potentially explosive areas) installation approval and is easily mounted on a DIN rail


The 2864655 can isolate and filter standard current signals from 0mA up to 20 mA.

Features and benefits:

  • 1 channel on a housing of only 6.2 mm

  • No need for any additional auxiliary voltage

  • Voltage drop at isolating amplifier of just 1.7 V

  • Supplied by an input loop

  • ATEX rating allowing for installation in zone 2 areas (potentially explosive areas)

  • Mounted on either TBUS connector or straight onto DIN rail

Specificaties
Kenmerk Waarde
Input Range 0 → 20 mA
Output Range 0 → 20 mA
Supply Voltage 18 V
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 → +65 °C
Series MINI MCR-SL-1CP-I-I
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
150,11
(excl. BTW)
181,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 150,11
Related Products
The intrinsically safe interface blocks of the MACX ...
Description:
The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design. Ex-i signal conditioner for many applicationsElectrical 3-way isolationScrew or spring-cage connections are availableIP20 protectionWidth only 12.5 mm.
MINI MCR series limit value switches, with adjustable ...
Description:
MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection. Power supply possible via the foot element (T-connector)Status and error indication via two diagnostic LEDsPDT relay at output3-way isolationLimit value can be freely adjusted via ...
Can be mounted on DIN rail individually or ...
Description:
Can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. Input, 2 x 24 VDC supplyIntegrated diode decoupling of power suppliesOutput, ...
Inputs, 0-20mA, 4-20mA, 1-10mA, 2-10mA, 0-10V, 1-5V, 0-5V, ...
Description:
Inputs, 0-20mA, 4-20mA, 1-10mA, 2-10mA, 0-10V, 1-5V, 0-5V, 2-10VOutputs, 8 frequency bands and 8 PWM standards3-way isolated24VDC powered on module or via DIN rail bus connector6.2mm wideScrew terminals.