Phoenix Contact MINI MCR SL UI UI NC, Isolation Galvanic Isolator, ATEX,

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

MINI MCR-SL-UI-UI-NC Signal conditioner - 2864150

From Phoenix contact, is a 3-way isolating amplifier that is used to electrically isolate analogue signals. The 2864150 boasts up to 36 signal combinations thanks to it's easy to access DIP Switch located on the side and with Phoenix's T-BUS connector, this unit can be powered with just a plug and play connector meaning now messy stripping of wires. Of course, if needed you can give the module power via wire thanks to its screw connections located on the front-end.

Phoenix Contact have designed this to fit with their already popular MINI MCR series, meaning this module is only 6.2mm wide allowing it to fit on any DIN rail that needs to be efficient.

Features and benefits:

  • Multiple ways to supply power thanks to the cleverly designed inputs (via T-BUS connector or wires)

  • 3-Way isolation

  • Low power consumption

  • 36 combinations available with DIP switches

  • Input and output, 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5V

  • Mounted onto a DIN rail

Applications:

  • Electrical isolation

  • Signal conversion

  • Amplification

  • Filtering of standard analogue signals

Specificaties
Kenmerk Waarde
Input Range 0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 2 → 10 V, 4 → 20 mA
Output Range 0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 2 → 10 V, 4 → 20 mA
Supply Voltage 24 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 → +65 °C
Hazardous Area Certification ATEX
Series MINI MCR SL UI UI NC
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
29 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
204,03
(excl. BTW)
246,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 204,03
Related Products
Phoenix Contact MACX MCR series loop powered isolators ...
Description:
Phoenix Contact MACX MCR series loop powered isolators for the electrical isolation of analogue signals. Available as single or dual channel devices with active sensor technology and a supply voltage of 6 V dc to 30 V dc.
The intrinsically safe interface blocks of the MACX ...
Description:
The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design. Ex-i signal conditioner for many applicationsElectrical 3-way isolationScrew or spring-cage connections are availableIP20 protectionWidth only 12.5 mm.
From Phoneix Contacts, the DIN-Rail mounted MCR-C 3-way ...
Description:
From Phoneix Contacts, the DIN-Rail mounted MCR-C 3-way signal conditioners are used for electrical isolation and conversion of analogue signals. Three-way electrical isolation ensures reliable decoupling of the sensor circuit from the processing circuit, thus also preventing several distributed measurement ...
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...