Phoenix Contact MINI MCR-SL-UI-F, Signal Converter, 0 10 V, 0 20 mA Input, 50 Hz Output

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Current/Voltage to Frequency Converter with 3-Way Isolation

Inputs, 0-20mA, 4-20mA, 1-10mA, 2-10mA, 0-10V, 1-5V, 0-5V, 2-10V
Outputs, 8 frequency bands and 8 PWM standards
3-way isolated
24VDC powered on module or via DIN rail bus connector
6.2mm wide
Screw terminals

Specificaties
Kenmerk Waarde
Input Range 0 10 V, 0 20 mA
Output Range 50 Hz
Supply Voltage 20 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 +65 °C
Series MINI MCR-SL-UI-F
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
139,33
(excl. BTW)
168,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 139,33
Related Products
Siemens Sirius 3RS70 signal converters perform the coupling ...
Description:
Siemens Sirius 3RS70 signal converters perform the coupling function for analogue signals on both the input side and the output side. They are indispensable when processing analogue values with electronic controls. Under harsh industrial conditions in particular, it is often ...
The signal splitter SP 2D-2D is a universal ...
Description:
The signal splitter SP 2D-2D is a universal encoder interface (without potential separation) with 2 incremental encoder inputs for level conversion, distribution as well as contactless and bounce-free switching of encoder signals to the HTL or RS422 format. The module ...
Symmetric DIN rail mounting units with finger protected ...
Description:
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above ...
Converts digital coded signals into standardised analogue signalsOutput: ...
Description:
Converts digital coded signals into standardised analogue signalsOutput: 0 to 10VModules for 8 or 12-bit coded digital signalsHOLD signal allows time controlModules are bus-capableConnection on the digital side via Combicon plugCan be mounted on all common EN mounting rails.